5秒后页面跳转
MAX77301 PDF预览

MAX77301

更新时间: 2024-09-28 12:26:03
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
1页 638K
描述
JEITA-Compliant, Li Charger with Smart Power Selector, Automatic Detection

MAX77301 数据手册

  
EVALUATION KIT AVAILABLE  
ABRIDGED  
DATA SHEET  
MAX77301  
JEITA-Compliant, Li+ Charger with Smart Power  
Selector, Automatic Detection, and USB Enumeration  
General Description  
Benefits and Features  
S Enables Charging from a USB Port  
S Automatic Detection of Adapter Type  
The MAX77301 is a JEITA-compliant* lithium-ion linear  
battery charger that operates from a USB port, a dedi-  
cated charger, or universal adapter. The IC provides  
automatic adapter-type detection and enumeration with  
a USB host or hub. The IC integrates independent bat-  
tery charge switch, current sense circuit, MOSFET pass  
elements, thermal regulation circuitry, and eliminates the  
external reverse-blocking Schottky diode to create the  
simplest and smallest USB-compliant charging solution.  
S Input Current Up to 1500mA and Charging Current  
Up to 900mA  
S Enumeration Without Processor Intervention  
S Supports USB Low-Speed and Full-Speed  
S Compliant with USB 2.0 Specification and Battery  
Charging Specification (Revision 1.1)  
S Compliant with Next Generation Low-Voltage  
Li-Ion Battery Profiles  
The IC includes automated detection of charge adapter  
type, making it possible to distinguish USB 2.0 device,  
USB charger, dedicated charger devices as well as  
standard input adapters. See Table 2. When enumeration  
is enabled, the IC automatically negotiates with a USB  
host, making it possible to achieve the highest-charging  
current available from a USB 2.0 device or USB charger  
without processor intervention. The adapter type detec-  
tion is compliant with USB 2.0 as well as battery charging  
Specification Revision 1.1.  
S Input Overvoltage Protection Up to 16V  
S Smart Power Selector™ Allows Power Path  
Operation with Discharged or No Battery  
S Battery Detection Including Packs with Open  
Protectors  
S Thermal Regulation Prevents Overheating  
S LED Indicator for Charge Done, Precharge, and  
Time/Temperature Error  
S Serial (400kHz) I2C-Compatible Interface  
S 6µA (typ) Shutdown Current  
The IC controls the charging sequence for single-cell  
Li+ batteries from battery detection, prequalification,  
fast charge, top-off, and charge termination. Charging is  
controlled using constant current, constant voltage and  
constant die-temperature (CCCVCTj) regulation for safe  
operation under all conditions. The IC is also compliant  
with JEITA battery charging requirements.  
S 2.44mm x 2.44mm, 25-Bump WLP Package  
Applications  
Bluetooth Headsets, PDAs, and MP3 Players  
Other Portable Devices  
The Smart Power Selector feature makes the best use  
of limited USB or adapter power. Battery charge current  
is set independent of the input current limit. Power not  
used by the system charges the battery. The battery  
assists the input source when needed. System voltage  
is maintained by allowing the application to operate with-  
out a battery, a discharged battery, or a dead battery.  
Automatic input selection switches the system from bat-  
tery to external power.  
The I2C interface provides full programmability of battery  
charge characteristics, input current limit, and protec-  
tion features. This provides flexibility for use with a wide  
range of adapter and battery sizes.  
Simplified Operating Circuit  
4.0V TO 6.6V  
(+16V OVP)  
BUS  
SYS  
V
BUS  
SYSTEM  
LOAD  
2
I C  
CHARGE AND  
CONTROL  
LOGIC  
SYS LOAD  
SWITCH  
D+  
D-  
USB  
INTERFACE  
1-CELL LI-ION  
BATT  
OSC  
MAX77301  
Other features include undervoltage lockout (UVLO),  
overvoltage protection (OVP), charge status flag, charge  
fault flag, input power-OK monitor, battery detection,  
JEITA-compliant charging, charge timer, 3.3V/10mA aux-  
iliary output, and an external power-on switch.  
Ordering Information appears at end of data sheet.  
Smart Power Selector is a trademark of Maxim Integrated  
Products, Inc.  
*U.S. Patent # 6,507,172.  
For related parts and recommended products to use with this part, refer to www.maximintegrated.com/MAX77301.related.  
For pricing, delivery, and ordering information, please contact Maxim Direct  
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.  
19-6556; Rev 0; 1/13  

与MAX77301相关器件

型号 品牌 获取价格 描述 数据表
MAX77301A ADI

获取价格

符合JEITA标准的锂离子充电器,带有Smart Power Selector、自动检测和
MAX77324 ADI

获取价格

4.8VIN、1.5A、高效、超小尺寸Buck转换器
MAX77342EWE+T MAXIM

获取价格

Switching Controller, Voltage-mode, 1.6A, 4000kHz Switching Freq-Max, BICMOS, PBGA16, WLP-
MAX77348 ADI

获取价格

超低 IQ、低噪声 3.5W 升降压转换器
MAX77387 ADI

获取价格

双相自适应DC-DC升压转换器,集成2x 1000mA高边电流调节器
MAX77387EWP+T MAXIM

获取价格

Dual Switching Controller,
MAX773C/D MAXIM

获取价格

5V/12V/15V or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC Controllers
MAX773CPA MAXIM

获取价格

Analog IC
MAX773CPD MAXIM

获取价格

5V/12V/15V or Adjustable, High-Efficiency, Low IQ, Step-Up DC-DC Controllers
MAX773CSA MAXIM

获取价格

Analog IC