Evaluation Kit
Available
Design
Resources
Tools
and Models
Support
Click here to ask an associate for production status of specific part numbers.
4.8V , 1.5A High-Efficiency,
Ultra-Small Buck Converter
MAX77324
IN
General Description
The MAX77324 is a single channel high-efficiency syn-
Benefits and Features
● 1.5A Output Current Step-down Converter
chronous step-down (buck) converter capable of deliver-
ing up to 1.5A of current. With a 6.89mm total solution
size, up to 93% efficiency, and 40µA quiescent current,
it is optimized for portable space constrained battery-
operated applications.
● 2.5V to 4.8V V Range
IN
2
● 0.6V to 2V Adjustable V
Range, ±2% Accuracy
OUT
● MAX77324EWTAD+
• Skip Mode for High Light-Load Efficiency
• 40μA Quiescent Current
The device operates over a 2.5V to 4.8V input volt-
age range to support Li+ battery powered applications.
The output voltage is adjustable from 0.6V to 2V, with
a better than 2% accuracy over the whole temperature
range. The device uses constant-on-time PWM control
scheme. A nominal 2MHz switching frequency reduces
the overall solution footprint by use of small 0603 induc-
tor. An automatic SKIP mode is also implemented to
improve the light-load efficiency for MAX77324EWTAD+.
MAX77324GEWTAD+ operates in PWM mode for all
load conditions. The device provides low output voltage
ripple, excellent line and load regulation, and transient
response. A dedicated enable pin allows for simple hard-
ware control.
● MAX77324GEWTAD+
• PWM Mode Only
● 93% Peak Efficiency (3.8V , 1.8V
)
IN
OUT
● 1μA Shutdown Current
● 2MHz Nominal Switching Frequency
● Enable Pin for Direct Hardware Control
● Cycle-by-Cycle Inductor Current Limit
● UVLO, Soft-Start, Active Output Discharge,
Short-Circuit, and Thermal Shutdown Protections
● 1.22mm x 0.85mm, 6-Bump WLP
2
• 6.89mm Total Solution Area
Built-in undervoltage lockout (UVLO), soft-start, active
output discharge, cycle-by-cycle short-circuit, and thermal
shutdown protections insure safe operations under abnor-
mal operating conditions.
• Uses Small 0603 0.47μH Inductor
Applications
● 1-Cell Battery Powered Equipment
● Portable/Wearables
The device is available in a space-saving 1.22mm x
0.85mm, 6-bump wafer-level package (WLP).
● Internet of Things (IoT) Devices
● Space Constrained Equipment
Ordering Information appears at end of data sheet.
1-Cell to Core Voltage Buck Converter Application Circuit
6.89mm2 SOLUTION SIZE
L
L
V
OUT
0.47μH
0.6V TO 2.0V
IN
LX
2.5V TO 4.8V
DC SOURCE
C
10μF
IN
C
OUT
22μF
MAX77324
C
IN
C
TOP
R
*
TOP
220pF
FB
ENABLE
EN
R
BOT
PGND
AGND
R
R
TOP
BOT
30.1kΩ, 1%
2.12mm
*CHOOSE R
VALUE BASE ON V , REFER TO TABLE 1
OUT
TOP
19-100206; Rev 3; 4/23
©
2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2023 Analog Devices, Inc. All rights reserved.
|
|