Datasheet > MAX7311AAG-T

MAX7311AAG-T

更新时间： 2024-02-24 04:04:47

品牌	Logo	应用领域
美信 - MAXIM		信息通信管理光电二极管外围集成电路
页数	文件大小	规格书
16页	369K
描述
Parallel I/O Port, 16-Bit, 16 I/O, BICMOS, PDSO24, 5.30 MM, MO-150, SSOP-24

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MAX7311AAG-T 技术参数

是否Rohs认证：	不符合	生命周期：	Transferred
包装说明：	SSOP, SSOP24,.3	Reach Compliance Code：	unknown
风险等级：	5.89	JESD-30 代码：	R-PDSO-G24
位数：	16	端子数量：	24
最高工作温度：	125 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	SSOP
封装等效代码：	SSOP24,.3	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, SHRINK PITCH	电源：	2/5.5 V
认证状态：	Not Qualified	子类别：	Parallel IO Port
表面贴装：	YES	技术：	BICMOS
温度等级：	AUTOMOTIVE	端子形式：	GULL WING
端子节距：	0.635 mm	端子位置：	DUAL

MAX7311AAG-T 数据手册

2-Wire-Interfaced 16-Bit I/O Port Expander

with Interrupt and Hot-Insertion Protection

SDA

SCL

START

STOP

CONDITION

Figure 3. START and STOP Conditions

SDA

SCL

DATA LINE STABLE; DATA VALID CHANGE OF DATA ALLOWED

Figure 4. Bit Transfer

START CONDITION

SCL

CLOCK PULSE FOR ACKNOWLEDGMENT

SDA

BY TRANSMITTER

SDA

BY RECEIVER

Figure 5. Acknowledge

Each transmission consists of a START condition sent by

a master, followed by the MAX7311 7-bit slave address

plus R/W bit, a register address byte, 1 or more data

bytes, and finally a STOP condition (Figure 3).

Bit Transfer

One data bit is transferred during each clock pulse.

The data on SDA must remain stable while SCL is high

(Figure 4).

START and STOP Conditions

Both SCL and SDA remain high when the interface is

not busy. A master signals the beginning of a transmis-

sion with a START (S) condition by transitioning SDA

from high to low while SCL is high. When the master

has finished communicating with the slave, it issues a

STOP (P) condition by transitioning SDA from low to

high while SCL is high. The bus is then free for another

transmission (Figure 3).

Acknowledge

The acknowledge bit is a clocked 9th bit, which the

recipient uses as a handshake receipt of each byte of

data (Figure 5). Thus, each byte transferred effectively

requires 9 bits. The master generates the 9th clock

pulse, and the recipient pulls down SDA during the

acknowledge clock pulse, such that the SDA line is sta-

ble low during the high period of the clock pulse. When

the master is transmitting to the MAX7311, the

_______________________________________________________________________________________

1...4 5 678 9 10...16

下载PDF

与MAX7311AAG-T相关器件

型号	品牌	描述	获取价格	数据表
MAX7311ATG	MAXIM	2-Wire-Interfaced 16-Bit I/O Port Expander with Interrupt and Hot-Insertion Protection	获取价格
MAX7311ATG+	MAXIM	Parallel I/O Port, 16-Bit, 16 I/O, BICMOS, 4 X 4 MM, 0.80 MM HEIGHT, MO-153, TQFN-24	获取价格
MAX7311ATG+	NXP	IC,I/O PORT,16-BIT,BICMOS,LLCC,24PIN,PLASTIC	获取价格
MAX7311ATG+GH7	MAXIM	Parallel I/O Port, 16 I/O, BICMOS, TQFN-24	获取价格
MAX7311ATG+T	MAXIM	Parallel I/O Port, 16-Bit, 16 I/O, BICMOS, 4 X 4 MM, 0.80 MM HEIGHT, MO-153, TQFN-24	获取价格
MAX7311ATG+T	NXP	IC,I/O PORT,16-BIT,BICMOS,LLCC,24PIN,PLASTIC	获取价格