19-2629; Rev 2; 1/03
Single-/Dual-/Triple-Voltage µP Supervisory
Circuits with Independent Watchdog Output
General Description
Features
ꢀ V 1 (Primary Supply) Reset Threshold Voltages
The MAX6730–MAX6735 single-/dual-/triple-voltage
microprocessor (µP) supervisors feature a watchdog
timer and manual reset capability. The MAX6730–
MAX6735 offer factory-set reset thresholds for monitor-
ing voltages from +0.9V to +5V and an adjustable reset
input for monitoring voltages down to +0.63V. The com-
bination of these features significantly improves system
reliability and accuracy when compared to separate
ICs or discrete components.
CC
from +1.575V to +4.63V
ꢀ V 2 (Secondary Supply) Reset Threshold
CC
Voltages from +0.79V to +3.08V
ꢀ Adjustable RSTIN Threshold for Monitoring
Voltages Down to +0.63V (MAX6734/MAX6735 Only)
ꢀ Six Reset Timeout Options
ꢀ Watchdog Timer with Independent Watchdog Output
35s (min) Initial Watchdog Startup Period
The active-low reset output asserts and remains asserted
for the reset timeout period after all the monitored volt-
ages exceed their respective thresholds. Multiple factory-
set reset threshold combinations reduce the number of
external components required. The MAX6730/MAX6731
monitor a single fixed voltage, the MAX6732/MAX6733
monitor two fixed voltages, and the MAX6734/MAX6735
monitor two fixed voltages and one adjustable voltage. All
devices are offered with six minimum reset timeout peri-
ods ranging from 1.1ms to 1120ms.
1.12s (min) Normal Watchdog Timeout Period
ꢀ Manual Reset Input
(MAX6730/MAX6731/MAX6734/MAX6735)
ꢀ Guaranteed Reset Valid down to
V
1 or V 2 = +0.8V
CC
CC
ꢀ Push-Pull RESET or Open-Drain RESET Output
ꢀ Immune to Short V Transients
CC
The MAX6730–MAX6735 feature a watchdog timer with
an independent watchdog output. The watchdog timer
prevents system lockup during code execution errors.
A watchdog startup delay of 54s after reset asserts
allows system initialization during power-up. The watch-
dog operates in normal mode with a 1.68s delay after
initialization. The MAX6730/MAX6732/MAX6734 provide
an active-low, open-drain watchdog output. The
MAX6731/MAX6733/MAX6735 provide an active-low,
push-pull watchdog output.
ꢀ Low Supply Current: 14µA (typ) at +3.6V
ꢀ Small 6-Pin and 8-Pin SOT23 Packages
Ordering Information
PART*
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
6 SOT23-6
6 SOT23-6
6 SOT23-6
6 SOT23-6
8 SOT23-8
8 SOT23-8
MAX6730UT_D_ -T
MAX6731UT_D_ -T
MAX6732UT_ _D_ -T
MAX6733UT_ _D_ -T
MAX6734KA_ _D_ -T
MAX6735KA_ _D_ -T
Other features include a manual reset input (MAX6730/
MAX6731/MAX6734/MAX6735) and push-pull reset out-
put (MAX6731/MAX6733/MAX6735) or open-drain reset
output (MAX6730/MAX6732/MAX6734). The MAX6730–
MAX6733 are offered in a tiny SOT23-6 package. The
MAX6734/MAX6735 are offered in a space-saving
SOT23-8 package. All devices are fully specified over
the extended temperature range (-40°C to +85°C).
*Note: Insert the threshold level suffixes for V 1 and V
2
CC
CC
(Table 1) after “UT” or “KA.” For the MAX6730/MAX6731, insert
Applications
only the V 1 threshold suffix after the “UT.” Insert the reset
CC
timeout delay (Table 2) after “D” to complete the part number.
Multivoltage Systems
Telecom/Networking Equipment
Computers/Servers
For example, the MAX6732UTLTD3-T provides a V 1 threshold
CC
of +4.625V, a V 2 threshold of +3.075V, and a 210ms reset
CC
timeout period. Sample stock is generally held on standard ver-
sions only (see the Standard Versions table). Standard versions
have an order increment requirement of 2500 pieces.
Nonstandard versions have an order increment requirement of
10,000 pieces. Contact factory for availability.
Portable/Battery-Operated Equipment
Industrial Equipment
Printer/Fax
Set-Top Boxes
Typical Operating Circuit and Pin Configurations appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
5秒后页面跳转
PCF8574资料解读：主要参数分析、引脚说明
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
一文带你了解压敏电阻器在直流电路中的过压保护作用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
