19-1567; Rev 0, 1/00
MAX2267/MAX2268/MAX2269 Evaluation Kits
General Description
____________________________Features
ꢀ Easy Evaluation of MAX2267/MAX2268/MAX2269
ꢀ +2.7V to +4.5V Single-Supply Operation
The MAX2267/MAX2268/MAX2269 evaluation kits (EV
kits) simplify evaluation of the MAX2267/MAX2268/
MAX2269 power amplifiers (PAs), which are optimized
for IS-98-based CDMA and PDC cellular phones oper-
ating in the Japanese cellular frequency band. The kits
enable testing of the devices’ RF performance and
require no additional support circuitry. The EV kits’ sig-
nal inputs and outputs use SMA connectors to facilitate
the connection of RF test equipment.
ꢀ RF Input/Output Matched for 887MHz to 925MHz
Operation
ꢀ All Matching Components Included
Ordering Information
PART
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
IC PACKAGE
16 TSSOP-EP*
16 TSSOP-EP*
16 TSSOP-EP*
Each kit is assembled with the MAX2267, MAX2268, or
MAX2269 and incorporates input and output matching
components optimized for the 887MHz to 925MHz RF
frequency band. These EV kits are capable of operat-
ing at RF frequencies from 750MHz to 1000MHz, with
the appropriate matching components.
MAX2267EVKIT
MAX2268EVKIT
MAX2269EVKIT
*Exposed paddle
MAX2267 EV Kit Component List
DESIGNATION QTY
DESCRIPTION
DESIGNATION QTY
DESCRIPTION
5.1pF 0.25pF ceramic capacitor (060ꢁ)
Murata GRMꢁ9COG5R1C50
22pF 5ꢀ ceramic capacitor (0402)
Murata GRMꢁ6COG220J050 or
Taiyo Yuden UMK105CM220JW
C1
1
Cꢁ0
1
C2, C4, C6,
C7, C9,
C14, C17
100pF 5ꢀ ceramic capacitors (0402)
Murata GRMꢁ6COG101J50 or
Taiyo Yuden UMK105CH101JW
GND, VCC
IN, OUT
JU1, JU2
L1
2
2
2
1
Test points
7
SMA connectors (PC edge mount)
EFJohnson 142-0701-801
0.01µF 5ꢀ ceramic caps (0402)
Murata GRMꢁ6X7R10ꢁJ16 or
Taiyo Yuden EMK105B10ꢁKW
Cꢁ, C5, C8,
C1ꢁ, C16
ꢁ-pin headers
5
1
ꢁ.ꢁnH 0.ꢁnH inductor (060ꢁ)
Murata LQG11AꢁNꢁS00
5.6nH 2ꢀ inductor
Coilcraft 1606-6G
12nH 5ꢀ inductor (060ꢁ)
Murata LQG11A12NJ00
ꢁ9nH 5ꢀ inductor (060ꢁ)
Murata LQG11Aꢁ9NJ00
7.5pF 0.1pF porcelain capacitor
ATC 100A7R5BW150X
C10
L2
Lꢁ
L4
L5
1
1
1
1
4.7pF 0.1pF porcelain capacitor
ATC 100A4R7FW150X, mounted with
top side aligned six tick marks from
zero (ruler located to the right of C11;
Figure ꢁ)
C11
1
1.2nH 0.ꢁnH inductor (060ꢁ)
Murata LQG11A1N2S00
Not installed
4.7pF 0.1pF ceramic capacitor (0402)
Murata GRMꢁ9COG4R7B50V
C12
C15, C27–C29
C18
1
0
1
Q2
R1, Rꢁ
R2, R7
R4
0
2
2
1
1
1
ꢁ
1
1
2
1
1
Not installed
51kΩ 5ꢀ resistors (060ꢁ)
26.1kΩ 1ꢀ resistors (060ꢁ)
7.5kΩ 1ꢀ resistor (060ꢁ)
24.ꢁkΩ 1ꢀ resistor (060ꢁ)
Not installed
220pF 5ꢀ ceramic capacitor (060ꢁ)
Murata GRMꢁ9COG221J050
10µF 20ꢀ, 16V tantalum capacitor
AVX TAJB106M016
C19
C20
C21
1
1
1
R5
R6
0.01µF 5ꢀ ceramic capacitor (060ꢁ)
Murata GRMꢁ9X7R10ꢁJ50
R8, R9, R10
U1
0Ω resistors (060ꢁ)
100pF 5ꢀ ceramic capacitor (060ꢁ)
Murata GRMꢁ9COG101J50
MAX2267EUE (16-pin TSSOP-EP)
0Ω 5ꢀ resistor (0402)
Shunts (JU1, JU2)
U2
0.1µF 10ꢀ ceramic capacitors (060ꢁ)
Murata GRMꢁ9X7R104K50V or
Taiyo Yuden EMK107BJ104KA
None
None
None
C22–C25
C26
4
1
MAX226Y PC board
MAX2267/8/9 data sheet
470pF 5ꢀ ceramic capacitor (060ꢁ)
Murata GRMꢁ9COHG471J50
________________________________________________________________ Maxim Integrated Products
1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.