EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX17673/MAX17673A Integrated 4.5V to 60V Synchronous 1.5A HV Buck
and Dual 2.7V to 5.5V, 1A Buck Regulators
General Description
Benefits and Features
MAX17673/MAX17673A power management integrated
circuits (PMIC) integrate a 60V high voltage (HV), high
efficiency synchronous DC-DC buck regulator and two
5.5V high efficiency synchronous DC-DC buck regulators.
All three regulators offer integrated power MOSFETs.
● Reduces External Components and Total Cost
• Synchronous Operation for High Efficiency
• Internal Compensation for a Wide Output Voltage
Range
• All-Ceramic Capacitors,Compact Layout
● Integrates Three DC-DC Regulators
• Wide 4.5V to 60V Input Voltage Range for the HV
Regulator. 2.7V to 5.5V Input Range for LV
Regulators.
The HV regulator operates from a 4.5V to 60V input volt-
age range and the LV regulators operate from a 2.7V to
5.5V input voltage range. The HV regulator supports load
currents up to 1.5A, and can regulate output voltages from
0.9V to 5.5V. The LV regulators support load currents up to
1A, and can regulate output voltages from 0.75V to 4.8V.
• Adjustable 0.9V to 5.5V Output for the HV Regula-
tor and 0.75V up to 4.8V Output for LV Regulators
• Delivers up to 1.5A Load Current for the HV Regu-
lator and 1A Load Current for LV Regulators
• Adjustable Switching Frequency: 250KHz to
800KHz for HV Regulator and 1MHz to 4MHz for
LV Regulators
• Programmable LV / HV Switching Frequency Ratio
(2, 3, 4, 5, 6, 7, 8)
• EN/UVLO for HV buck and EN for LV regulators
MAX17673/MAX17673A offer independent peak cur-
rent mode control, hiccup mode overcurrent protection,
ENABLE input and Power OK signal in the three regu-
lators. The switching frequency is adjustable between
1MHz and 4MHz in the LV regulators, and the HV regula-
tor can be programmed to run at a fractional switching
frequency of the LV regulators. The HV regulator offers
an adjustable soft-start function, while the LV regulators
present internally fixed soft-start. Users can choose to
operate the devices in either pulse frequency modulation
(PFM) or forced pulse width modulation (PWM) scheme.
The MAX17673A offers external clock synchronization.
● Reduces Power Dissipation
• 550μA in PFM and 10.2mA in PWM Mode
Quiescent Current
• Peak Efficiency > 92%
• Auxiliary Bootstrap LDO for Improved Efficiency
• PFM Mode for High Light-Load Efficiency
• 7.4μA Shutdown Current
The devices are available in a 28-pin, 5mm x 5mm TQFN
package and operates over a -40°C to +125°C tempera-
ture range.
● Operates Reliably in Adverse Industrial Environments
• Peak-Current Limit Protection
Applications
• Hiccup Mode Overload Protection
• Soft-Start Reduces Inrush Current During Startup
(Adjustable for HV Regulator)
• Built-In Output-Voltage Monitoring with POKH,
POKA, and POKB
● Industrial Control Power Supplies
● FPGA/CPLD Power Supplies
● Distributed Supply Regulation
● Base Station Power Supplies
● High Voltage Single Board Systems
• Monotonic Startup into Prebiased Load
• Overtemperature Protection
• Dynamic Mode Change for On-the-Fly Shift
Between PFM and PWM Mode
• -40°C to +125°C Operating Temperature Range
• Complies with CISPR22(EN55022) Class B
Conducted and Radiated Emissions
Ordering Information appears at end of data sheet.
19-100403; Rev 2; 11/19