EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX17673
Integrated 4.5V to 60V Synchronous 1.5A HV Buck
and Dual 2.7V to 5.5V, 1A Buck Regulators
General Description
Benefits and Features
MAX17673 power management integrated circuit (PMIC)
integrates a 60V high voltage (HV), high efficiency
synchronous DC-DC buck regulator and two 5.5V high
efficiency synchronous DC-DC buck regulators. All three
regulators offer integrated power MOSFETs.
● Reduces External Components and Total Cost
• Synchronous Operation for High Efficiency
• Internal Compensation for a Wide Output Voltage
Range
• All-Ceramic Capacitors,Compact Layout
● Integrates Three DC-DC Regulators
• Wide 4.5V to 60V Input Voltage Range for the HV
Regulator. 2.7V to 5.5V Input Range for LV
Regulators.
The HV regulator operates from a 4.5V to 60V input volt-
age range and the LV regulators operate from a 2.7V to
5.5V input voltage range. The HV regulator supports load
currents up to 1.5A, and can regulate output voltages from
0.9V to 5.5V. The LV regulators support load currents up to
1A, and can regulate output voltages from 0.75V to 4.8V.
• Adjustable 0.9V to 5.5V Output for the HV Regula-
tor and 0.75V up to 4.8V Output for LV Regulators
• Delivers up to 1.5A Load Current for the HV Regu-
lator and 1A Load Current for LV Regulators
• Adjustable Switching Frequency: 250KHz to
800KHz for HV Regulator and 1MHz to 4MHz for
LV Regulators
• Programmable LV / HV Switching Frequency Ratio
(2, 3, 4, 5, 6, 7, 8)
• EN/UVLO for HV buck and EN for LV regulators
MAX17673 offers independent peak current mode con-
trol, hiccup mode overcurrent protection, ENABLE input
and Power OK signal in the three regulators. The switch-
ing frequency is adjustable between 1MHz and 4MHz
in the LV regulators, and the HV regulator can be pro-
grammed to run at a fractional switching frequency of the
LV regulators. The HV regulator offers an adjustable soft-
start function, while the LV regulators present internally
fixed soft-start. Users can choose to operate the device in
either pulse frequency modulation (PFM) or forced pulse
width modulation (PWM) scheme.
● Reduces Power Dissipation
• 550μA in PFM and 10.2mA in PWM Mode
Quiescent Current
• Peak Efficiency > 92%
The device is available in a 28-pin, 5mm x 5mm TQFN
package and operates over a -40°C to +125°C tempera-
ture range.
• Auxiliary Bootstrap LDO for Improved Efficiency
• PFM Mode for High Light-Load Efficiency
• 7.4μA Shutdown Current
● Operates Reliably in Adverse Industrial Environments
• Peak-Current Limit Protection
Applications
● Industrial Control Power Supplies
● FPGA/CPLD Power Supplies
● Distributed Supply Regulation
● Base Station Power Supplies
● High Voltage Single Board Systems
• Hiccup Mode Overload Protection
• Soft-Start Reduces Inrush Current During Startup
(Adjustable for HV Regulator)
• Built-In Output-Voltage Monitoring with POKH,
POKA, and POKB
• Monotonic Startup into Prebiased Load
• Overtemperature Protection
• -40°C to +125°C Operating Temperature Range
Ordering Information appears at end of data sheet.
19-100403; Rev 0; 10/18