Evaluation Kit
Available
Design
Resources
Tools
and Models
Support
Click here to ask an associate for production status of specific part numbers.
High-Accuracy, Adjustable Power Limiter
MAX17525
General Description
Benefits and Features
● Robust, High-Power Protection Reduces System
The Olympus series of ICs are the industry’s smallest
and robust integrated system protection solutions. The
MAX17525 adjustable overvoltage, undervoltage, and
overcurrent protection device guards systems against
overcurrent faults in addition to positive overvoltage and
reverse-voltage faults. When used with an optional external
pMOSFET, the device also protects downstream circuitry
Downtime
• Wide Input-Supply Range: +5.5V to +60V
• Programmable Input-Supply Overvoltage Setting
Up To 40V
• -60V Negative Input Tolerance with External
pFET (for -(60 + V
) External pFET Rating)
OUT
• Low 31mΩ (typ) R
from voltage faults up to +60V, -60V (for -(60V +V
)
ON
OUT
• Reverse Current-Blocking Protection with External
pFET
external pFET rating). The device features a low, 31mΩ,
on-resistance integrated FET.
During startup, the MAX17525 is designed to charge large
capacitances on the output in a continuous mode for applica-
tions where large reservoir capacitors are used on the inputs
to downstream devices. Two additional part options that fea-
ture a dual-stage, current-limit mode in which the current is
continuously limited to 1.5x and 2x the programmed limit are
available upon request. These options enable faster charg-
ing of large load capacitances during startup.
The MAX17525 also features reverse-current and
overtemperature protection. The device is available in a
20-pin (5mm x 5mm) TQFN package and operate over
the -40°C to 125°C temperature range.
● Enables Fast Startup and Brownout Recovery
• Thermal Foldback Current-Limit Protection
• 1.5x, 2x Startup Current Limit Options
● Flexible Design Enables Reuse and Less
Requalification
• Adjustable OVLO and UVLO Thresholds
• Programmable Forward Current Limit From 0.6A
to 6A with ±15% Accuracy Over Full Temperature
Range
• Normal and High-Voltage Enable Inputs
(EN and HVEN)
• Protected External pFET Gate Drive
Applications
● Saves Board Space and Reduces External BOM
Count
● Industrial Power Systems
● Control and Automation
● Motion System Drives
● Human Machine Interfaces
● High-Power Applications
• 20-Pin 5mm x 5mm TQFN Package
• Integrated nFET
Ordering Information appears at end of data sheet.
Typical Application Circuit
V
IN
*R1, R2, R3, AND R4 ARE ONLY
REQURED FOR ADJUSTABLE
UVLO/OVLO FUNCTIONALITY.
OTHERWISE, TIE THE PIN TO
GND TO USE THE INTERNAL,
PREPROGRAMMED
C
IN
C
IN_IC
GP
IN
IN IN IN IN
OUT
V
V
IN
R1*
R3*
SYSTEM
CONTROLLER
UVLO
POWER
THRESHOLD.
OUT
OUT
PROTECTED
POWER
220kΩ
R2*
R4*
SYSTEM
INPUT
ADC
MAX17525
C
OUT
IN
OUT
R
SETI
OVLO
HVEN
OUT
SETI
RIPEN
FLAG
EN
GND
ENB
FAULT
EN
HVEN
x
CLTS2
10kΩ
CLTS1
GND
19-8572; Rev 4; 3/22
One Analog Way, Wilmington, MA 01887 U.S.A.
|
Tel: 781.329.4700
|
© 2022 Analog Devices, Inc. All rights reserved.