19-1013; Rev 0; 11/07
Voltage Monitors/Sequencer Circuits with
Reverse-Sequencing Capability
/MAX6051
General Description
Features
♦ Monitor Up to 6 Voltages/Sequence Up to 5
The MAX16050 monitors up to 5 voltages and
sequences up to 4 voltages, while the MAX16051 moni-
tors up to 6 voltages and sequences up to 5 voltages.
These devices provide an adjustable delay as each sup-
ply is turned on and they monitor each power-supply
voltage. When all of the voltages reach their final values
and the reset delay timer expires, a power-on-reset
(POR) output deasserts allowing the microcontroller (µC)
to operate. If any voltage falls below its threshold, the
reset output asserts and all voltage supplies are turned
off. The MAX16050/MAX16051 can be daisy-chained to
control a higher number of voltages in a system.
Voltages
♦ Pin-Selectable Sequencing Order (MAX16050 Only)
♦ Reverse-Sequencing Capability on Shutdown
♦ Overvoltage Monitoring with Independent Output
♦
1ꢀ5ꢁ ꢂhreshold Accuracy
♦ 2ꢀ7V to 13ꢀ2V Operating Voltage Range
♦ Charge Pump to Fully Enhance External
n-Channel FEꢂs
♦ Capacitor-Adjustable Sequencing Delay
During a power-down event, the MAX16050/MAX16051
can reverse sequence the outputs. In this situation, each
voltage is turned off sequentially until it reaches a 250mV
level, at which point, the next supply is turned off. The
MAX16050/MAX16051 also provide internal pulldown cir-
cuitry that turns on during power-down, to help dis-
charge large output capacitors.
♦ Fixed or Capacitor-Adjustable Reset ꢂimeout
♦ Internal 85mA Pulldowns for Discharging
Capacitive Loads Quickly
♦ Daisy-Chaining Capability to Communicate
Across Multiple Devices
♦ Small 4mm x 4mm, 28-Pin ꢂQFN Package
The MAX16050/MAX16051 feature a charge-pump sup-
ply output that can be used as a pullup voltage for dri-
ving external n-channel MOSFETs and an overvoltage
output that indicates when any of the monitored voltages
exceeds its overvoltage threshold. The MAX16050 also
provides three sequence control inputs for changing the
sequence order, while the MAX16051 has a fixed
sequence order.
Pin Configurations
TOP VIEW
21 20 19 18 17 16 15
14
13
SHDN 22
DELAY 23
EN_HOLD
DISC2
12 OUT2
24
25
26
27
28
TIMEOUT
SEQ1
The MAX16050/MAX16051 are available in a 28-pin
(4mm x 4mm) thin QFN package and are fully specified
over the -40°C to +85°C extended operating tempera-
ture range.
SET2
DISC3
OUT3
SET3
11
10
9
MAX16050
SEQ2
SEQ3
*EP
6
+
Applications
8
CP_OUT
1
2
3
4
5
7
Servers
Telecom Equipment
Storage Systems
Workstations
Networking Systems
ꢂHIN QFN
(4mm x 4mm)
*EP = EXPOSED PAD
Pin Configurations continued at end of data sheet.
ꢂypical Operating Circuit appears at end of data sheetꢀ
Ordering Information
MONIꢂORED
VOLꢂAGES
VOLꢂAGES
SEQUENCED
PARꢂ
PIN-PACKAGE
PACKAGE CODE
MAX16050ETI+
MAX16051ETI+
5
6
4
5
28 TQFN-EP*
28 TQFN-EP*
T2844-1
T2844-1
Note: All devices are specified over the -40°C to +85°C operating temperature range.
+Denotes lead-free package.
*EP = Exposed pad.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at wwwꢀmaxim-icꢀcomꢀ