EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX11120–MAX11128
1Msps, Low-Power, Serial 12-/10-/8-Bit,
4-/8-/16-Channel ADCs
General Description
Benefits and Features
● Scan Modes, Internal Averaging, and Internal Clock
● 16-Entry First-In/First-Out (FIFO)
● SampleSet: User-Defined Channel Sequence with
Maximum Length of 256
● Analog Multiplexer with True Differential Track/Hold
• 16-/8-/4-Channel Single-Ended
• 8-/4-/2-Channel Fully-Differential Pairs
• 15-/8-/4-Channel Pseudo-Differential Relative to a
Common Input
● Two Software-Selectable Bipolar Input Ranges
The MAX11120–MAX11128 are 12-/10-/8-bit with external
reference and industry-leading 1.5MHz, full linear band-
width, high speed, low-power, serial output successive-
approximation register (SAR) analog-to-digital converters
(ADCs). The MAX11120–MAX11128 include both internal
and external clock modes. These devices feature scan
mode in both internal and external clock modes. The inter-
nal clock mode features internal averaging to increase
SNR. The external clock mode features the SampleSet™
technology, a user-programmable analog input channel
sequencer. The SampleSet approach provides greater
sequencing flexibility for multichannel applications while
alleviating significant microcontroller or DSP (controlling
unit) communication overhead.
• ±V
/2, ±V
REF+
REF+
● Flexible Input Configuration Across All Channels
● High Accuracy
The internal clock mode features an integrated FIFO
allowing data to be sampled at high speeds and then held
for readout at any time or at a lower clock rate. Internal
averaging is also supported in this mode improving SNR
for noisy input signals. The devices feature analog input
channels that can be configured to be single-ended
inputs, fully differential pairs, or pseudo-differential inputs
with respect to one common input. The MAX11120–
MAX11128 operate from a 2.35V to 3.6V supply and
consume only 5.4mW at 1Msps.
• ±1 LSB INL, ±1 LSB DNL, No Missing Codes
Over Temperature Range
● 70dB SINAD Guaranteed at 250kHz Input Frequency
● 1.5V to 3.6V Wide Range I/O Supply
• Allows the Serial Interface to Connect Directly to
1.8V, 2.5V, or 3.3V Digital Systems
● 2.35V to 3.6V Supply Voltage
● Longer Battery Life for Portable Applications
• Low Power
• 5.4mW at 1Msps with 3V Supplies
• 2μA Full-Shutdown Current
The MAX11120–MAX11128 include AutoShutdown™, fast
wake-up, and a high-speed 3-wire serial interface. The
devices feature full power-down mode for optimal power
management.
● External Differential Reference (1V to V
)
DD
● 16MHz, 3-Wire SPI-/QSPI-/MICROWIRE-/DSP-
Compatible Serial Interface
● Wide -40°C to +125°C Operation
The 16MHz, 3-wire serial interface directly connects to
SPI, QSPI™, and MICROWIRE devices without external
®
● Space-Saving, 28-Pin, 5mm x 5mm TQFN Packages
● 1Msps Conversion Rate, No Pipeline Delay
● 12-/10-/8-Bit Resolution
logic.
Excellent dynamic performance, low voltage, low power,
ease of use, and small package size make these convert-
ers ideal for portable battery-powered data-acquisition
applications, and for other applications that demand low
power consumption and small space.
● AECQ-100 Qualified Variant Available (MAX11128ATI/V+)
Applications
● High-Speed Data Acquisition Systems
● High-Speed Closed-Loop Systems
● Industrial Control Systems
● Medical Instrumentation
The MAX11120–MAX11128 are available in 28-pin, 5mm
x 5mm, TQFN packages and operate over the -40°C to
+125°C temperature range.
● Battery-Powered Instruments
● Portable Systems
SampleSet and AutoShutdown are trademarks of Maxim
Integrated Products, Inc.
QSPI is a trademark of Motorola, Inc.
MICROWIRE is a registered trademark of National
Semiconductor Corporation.
Ordering Information appears at end of data sheet.
19-6148; Rev 4; 2/19