10-Bit, Multichannel ADCs/DACs with FIFO,
Temperature Sensing, and GPIO Ports
ABSOLUTE MAXIMUM RATINGS
AVDD to AGND ........................................................-0.3V to +6V
DGND to AGND.....................................................-0.3V to +0.3V
DVDD to AVDD......................................................-3.0V to +0.3V
Digital Inputs to DGND.............................................-0.3V to +6V
Continuous Power Dissipation (multilayer board, T = +70°C)
A
36-Pin TQFN (6mm x 6mm)
(derate 35.7mW/°C above +70°C)......................2857.1mW
48-Pin TQFN (7mm x 7mm)
Digital Outputs to DGND........................-0.3V to (V
Analog Inputs, Analog Outputs and REF_
to AGND .............................................-0.3V to (V
Maximum Current into Any Pin (except AGND, DGND, AVDD,
DVDD, and OUT_)...........................................................50mA
Maximum Current into OUT_.............................................100mA
+ 0.3V)
(derate 40mW/°C above +70°C)............................3200mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range.............................-60°C to +150°C
Junction Temperature......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
DVDD
+ 0.3V)
AVDD
Note: If the package power dissipation is not exceeded, one output at a time may be shorted to AVDD, DVDD, AGND, or DGND
indefinitely
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V
= V
= 2.7V to 3.6V (MAX1057), external reference V
= 2.5V (MAX1057), V
= V
= 4.75V to 5.25V
DVDD
AVDD
DVDD
REF
AVDD
(MAX1020/MAX1022/MAX1058), external reference V
REF
CLK
T
= -40°C to +85°C, unless otherwise noted. Typical values are at V
A
(MAX1020/MAX1022/MAX1058), T = +25°C. Outputs are unloaded, unless otherwise noted.)
A
PARAMETER
SYMBOL
CONDITIONS
ADC
MIN
TYP
MAX
UNITS
DC ACCURACY (Note 1)
Resolution
10
Bits
LSB
Integral Nonlinearity
Differential Nonlinearity
Offset Error
INL
0.5
0.5
1.0
1.0
2.0
2.0
DNL
LSB
0.25
0.025
1.4
LSB
Gain Error
(Note 2)
LSB
Gain Temperature Coefficient
Channel-to-Channel Offset
ppm/°C
LSB
0.1
DYNAMIC SPECIFICATIONS (10kHz sine-wave input, V = 2.5V
(MAX1057), V = 4.096V
(MAX1020/MAX1022/MAX1058),
IN
P-P
IN
P-P
225ksps, f
= 3.6MHz)
SCLK
27/MAX1058
Signal-to-Noise Plus Distortion
SINAD
THD
61
dB
Total Harmonic Distortion
(Up to the Fifth Harmonic)
-70
dBc
Spurious-Free Dynamic Range
Intermodulation Distortion
Full-Linear Bandwidth
SFDR
IMD
66
72
100
1
dBc
dBc
kHz
f
= 9.9kHz, f
= 10.2kHz
IN1
IN2
SINAD > 70dB
-3dB point
Full-Power Bandwidth
MHz
CONVERSION RATE (Note 3)
External reference
0.8
µs
Conversion
Clock
Power-Up Time
t
PU
Internal reference (Note 4)
218
Cycles
2
_______________________________________________________________________________________