MODEL: M1EXT-2
N, U, L, P (Platinel II)
2 Channel Super-mini Signal Conditioners
with Display M1E-2 Series
OUTPUT – Field-selectable
◆ DC Output
THERMOCOUPLE TRANSMITTER
(2 channels, PC programmable)
Functions & Features
• Current output: 0 - 20 mA DC
• Voltage output: -5 - +5 V DC
• Voltage output: -10 - +10 V DC
• Accepts direct input from a thermocouple and provides a
linearized process signal
• Wide selection of thermocouples
• 2 channels
[1] POWER INPUT
AC Power
• Adjustments with the front button
• OEL display with good visibility
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)
DC Power
Typical Applications
R: 24 V DC
• Small burnout sensing current enables long distance
transmission with minimum offset drifts
• Electric furnace (isolation)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
• No burnout type can connect to a single T/C in parallel
with a recorder
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
36 (1.42)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
99
(3.90)
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
mm (inch)
125 (4.92)
/SET: Preset according to the Ordering Information Sheet
(No. ESU-5985)
Note: The gure shows the combination
of the unit and the base.
RELATED PRODUCTS
• Installation base (model: M1E-BS2)
• M1E configurator software (model: M1ECFG)
Downloadable at M-System’s web site.
MODEL: M1EXT-2–[1][2]
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual (EM-5981) for the M1E configurator for
applicable cable types.
ORDERING INFORMATION
• Code number: M1EXT-2-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. M1EXT-2-M2/Q)
• Specify the specification for option code /Q
(e.g. /C01/SET)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection
• Connected to base with connector
• Base
NO. OF CHANNELS
2: 2 channels
M2.6 screw terminals (torque: 0.5 N·m)
Applicable solderless terminal size (M3)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Ch1.input to ch2.input to Ch1.output to ch2.output
INPUT – Field-selectable
Thermocouple
(PR), K (CA), E (CRC), J (IC), T (CC), B (RH), R, S, C (WRe 5-26),
M1EXT-2 SPECIFICATIONS
ES-5985 Rev.2 Page 1/9
https://www.m-system.co.jp/