LZ2413

更新时间： 2024-02-20 11:22:17

品牌	Logo	应用领域
夏普 - SHARP		传感器
页数	文件大小	规格书
11页	88K
描述
1/4-type Color CCD Area Sensors with 270 k Pixels

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

LZ2413 技术参数

生命周期：	Obsolete	包装说明：	1.27 MM PITCH, WINDOWED, PLASTIC, DIP-14
Reach Compliance Code：	unknown	风险等级：	5.82
Is Samacsys：	N	其他特性：	ELECTRONIC SHUTTER
主体宽度：	10 mm	主体高度：	3.35 mm
主体长度或直径：	10 mm	外壳：	PLASTIC
安装特点：	THROUGH HOLE MOUNT	光学格式：	1/4 inch
输出范围：	14.55-15.45V	输出类型：	ANALOG VOLTAGE
封装形状/形式：	SQUARE	像素大小：	7.2X5.6 µm
传感器/换能器类型：	IMAGE SENSOR,CCD	表面贴装：	NO
端接类型：	SOLDER	Base Number Matches：	1

LZ2413 数据手册

PRECAUTIONS FOR CCD AREA SENSORS

3) To avoid generating static electricity,

a. do not scrub the glass surface with cloth or

plastic.

ø The contamination on the glass surface

should be wiped off with a clean applicator

soaked in Isopropyl alcohol. Wipe slowly and

gently in one direction only.

b. do not attach any tape or labels.

c. do not clean the glass surface with dust-

cleaning tape.

– Frequently replace the applicator and do not

use the same applicator to clean more than

one device.

4) When storing or transporting the device, put it in

a container of conductive material.

◊ Note : In most cases, dust and contamination

are unavoidable, even before the device

is first used. It is, therefore, recommended

that the above procedures should be

taken to wipe out dust and contamination

before using the device.

3. Dust and Contamination

Dust or contamination on the glass surface could

deteriorate the output characteristics or cause a

scar. In order to minimize dust or contamination on

the glass surface, take the following precautions :

1) Handle the CCD in a clean environment such

as a cleaned booth. (The cleanliness level

should be, if possible, class 1 000 at least.)

2) Do not touch the glass surface with the fingers.

If dust or contamination gets on the glass

surface, the following cleaning method is

recommended :

4. Other

1) Soldering should be manually performed within

5 seconds at 350 °C maximum at soldering iron.

2) Avoid using or storing the CCD at high tem-

perature or high humidity as it is a precise

optical component. Do not give a mechanical

shock to the CCD.

ø Dust from static electricity should be blown

off with an ionized air blower. For anti-

electrostatic measures, however, ground all

the leads on the device before blowing off

the dust.

3) Do not expose the device to strong light. For

the color device, long exposure to strong light

will fade the color of the color filters.

1...8 9 1011

下载PDF

与LZ2413相关器件

型号	品牌	描述	获取价格	数据表
LZ2413A	SHARP	CCD Sensor, Rectangular, Through Hole Mount, 1.27 MM PITCH, WINDOWED, PLASTIC, DIP-14	获取价格
LZ2413B	ETC	Area CCD Image Array	获取价格
LZ2413H	SHARP	1/4-type Color CCD Area Sensors with 270 k Pixels	获取价格
LZ2414AJ	ETC	Area CCD Image Array	获取价格
LZ2414BJ	SHARP	CCD Sensor, Rectangular, Through Hole Mount, 1.27 MM PITCH, WINDOWED, PLASTIC, DIP-14	获取价格
LZ2414HJ	SHARP	CCD Sensor, Square, Through Hole Mount, 1.27 MM PITCH, WINDOWED, PLASTIC, DIP-14	获取价格