LTP5901-IPM/LTP5902-IPM
SmartMesh IP Node 2.4GHz
802.15.4e Wireless Mote Module
neTwork FeaTures
DescripTion
n
Complete Radio Transceiver, Embedded Processor,
and Networking Software for Forming a Self-Healing
Mesh Network
SmartMesh IP™ wireless sensor networks are self man-
aging, low power Internet Protocol (IP) networks built
from wireless nodes called motes. The LTP™5901-IPM/
LTP5902-IPMistheIPmoteproductintheEterna®*family
ofIEEE802.15.4eprintedcircuitboardassemblysolutions,
featuring a highly-integrated, low power radio design by
Dust Networks® as well as an ARM Cortex-M3 32-bit
microprocessor running Dust’s embedded SmartMesh IP
networking software. Both the LTP5901-IPM (with chip
antenna), at 24mm × 42mm, and the LTP5902-IPM (with
MMCX connector), at 24mm × 37mm, are designed for
surface mount assembly.
SmartMesh® Networks Incorporate:
n
n
Time Synchronized Network-Wide Scheduling
n
Per Transmission Frequency Hopping
n
Redundant Spatially Diverse Topologies
n
Network-Wide Reliability and Power Optimization
n
NIST Certified Security
n
SmartMesh Networks Deliver:
n
>99.999% Network Reliability Achieved in the
Most Challenging RF Environments
Sub 50µA Routing Nodes
n
With Dust’s time-synchronized SmartMesh IP networks,
all motes in the network may route, source or terminate
data, while providing many years of battery powered
operation. The SmartMesh IP software provided with the
LTP5901-IPM/LTP5902-IPM is fully tested and validated,
and is readily configured via a software Application Pro-
gramming Interface.
n
Compliant to 6LoWPAN Internet Protocol (IP) and
IEEE 802.15.4e Standards
lTp5901-ipM/lTp5902-ipM
FeaTures
n
Industry-Leading Low Power Radio Technology With:
SmartMesh IP motes deliver a highly flexible network
with proven reliability and low power performance in an
easy-to-integrate platform.
n
4.5mA to Receive a Packet
n
5.4mA to Transmit at 0dBm
9.7mA to Transmit at 8dBm
n
n
L, LT, LTC, LTM, Linear Technology, the Linear logo, Dust, Dust Networks, SmartMesh and
Eterna are registered trademarks and LTP, the Dust Networks logo and SmartMesh IP are
trademarks of Linear Technology Corporation. All other trademarks are the property of their
respective owners. Protected by U.S. Patents, including 7375594, 7420980, 7529217, 7791419,
7881239, 7898322, 8222965.
RF Modular Certification Include USA, Canada, EU,
Japan, Taiwan, Korea, India, Australia and New Zealand
n
PCB Assembly with Chip Antenna (LTP5901-IPM) or
* Eterna is Dust Networks’ low power radio SoC architecture.
with MMCX Antenna Connector (LTP5902-IPM). QFN
Version (LTC®5800-IPM) Available
Typical applicaTion
LTP5901-IPM
LTP5901-IPR/
LTP5902-IPR
ANTENNA
IN+
UART
LTC2379-18 SPI
UART
SENSOR
µCONTROLLER
IN–
HOST
APPLICATION
59012ipm TA01
59012ipmf
1
For more information www.linear.com/LTP5901-IPM or www.linear.com/LTP5902-IPM