LTM2894
Isolated USB Data
Transceiver
FEATURES
DESCRIPTION
TheLTM®2894isacompletegalvanically-isolatedUSB2.0
compatible μModule® (micromodule) transceiver.
n
Isolated USB Transceiver: 7500V
for 1 Minute
RMS
n
CSA (IEC/UL) Approved, File #255632
n
n
n
n
n
Reinforced Insulation
USB 2.0 Full Speed and Low Speed Compatible
Auto-Configuration of Bus Speed
4.4V to 36V V
3.3V LDO Output Supply Signal References V and
The LTM2894 is ideal for isolation in host, hub, bus split-
ter or peripheral device applications. It is compatible with
USB 2.0 full speed (12Mbps) and low speed (1.5Mbps)
operation.Automaticspeedselectionconfiguresintegrated
pull-up resistors on the upstream port to match those
sensed on the downstream device.
and V
Operating Range
BUS
BUS2
LO
V
LO2
n
n
n
n
n
50kV/μs Common Mode Transient Immunity
The isolator µModule technology uses coupled inductors
20kV ꢀBM ESD on USB Interface Pins
toprovide7500V
ofisolationand17.4mmofcreepage
1414V
Maximum Continuous Working Voltage
RMS
PEAK
between the upstream and downstream USB interface.
This device is ideal for systems requiring isolated ground
returnsorlargecommonmodevoltagevariations.Uninter-
rupted communication is guaranteed for common mode
transients greater than 50kV/μs.
17.4mm Creepage Distance
22mm × 6.25mm Surface Mount BGA
APPLICATIONS
n
Isolated USB Interfaces
Enhanced ESD protection allows this part to withstand
up to 20kV (human body model) on the USB transceiver
interface pins to local supplies and 20kV through the
isolation barrier to supplies without latchup or damage.
n
ꢀost, ꢀub, or Device Isolation
n
Industrial/Medical Data Acquisition
All registered trademarks and trademarks are the property of their respective owners.
TYPICAL APPLICATION
Isolated V2.0 Full Speed Hub Port
ꢋꢇ
ꢌꢍꢉ
Full Speed Data
ꢋꢇ
ꢏꢐꢏꢇ
ꢂ
ꢀꢁ
ꢇ
ꢇ
ꢑꢒꢍꢀ
ꢈꢄꢊꢀꢁꢂꢃ
ꢑꢒꢍ
ꢀꢁꢂꢃꢄꢅꢆꢃ
ꢇ
ꢇ
ꢈꢉꢀ
ꢈꢉ
ꢉꢎ
ꢉꢎꢀ
ꢆꢀꢅꢗꢘ
ꢔ
ꢔ
ꢓꢆ
ꢓꢀ
ꢛꢒꢑ
ꢗꢜ
ꢒꢍꢑ ꢖꢉRꢄ
ꢂ
ꢀꢁ
ꢀꢁꢂꢃꢄꢅꢆꢃ
ꢕ
ꢕ
ꢓꢆ
ꢓꢀ
ꢀꢁꢂꢃ ꢄAꢅꢆꢇ
ꢀꢁꢁꢂꢃꢄꢅꢆꢇ
ꢆꢋꢚ
ꢆꢋꢚ
ꢙꢎꢓ
ꢙꢎꢓꢀ
ꢀꢁꢂꢃ ꢄAꢅꢆ
Rev A
1
Document Feedback
For more information www.analog.com