LT3093
–20V, 200mA, Ultralow Noise, Ultrahigh
PSRR Negative Linear Regulator
FEATURES
DESCRIPTION
The LT®3093 is a high performance low dropout negative
linear regulator featuring ADI’s ultralow noise and ultrahigh
PSRR architecture for powering noise sensitive applica-
tions. The device can be easily paralleled to further reduce
noise, increase output current and spread heat on a PCB.
n
Ultralow RMS Noise: 0.8µV
(10Hz to 100kHz)
RMS
n
Ultralow Spot Noise: 2.2nV/√Hz at 10kHz
n
n
n
n
n
n
n
n
n
n
n
n
Ultrahigh PSRR: 73dB at 1MHz
Output Current: 200mA
Wide Input Voltage Range: –1.8V to –20V
Single Capacitor Improves Noise and PSRR
100µA SET Pin Current: 1% Initial Accuracy
Single Resistor Programs Output Voltage
Programmable Current Limit
The LT3093 supplies 200mA at a typical 190mV dropout
voltage. Operating quiescent current is nominally 2.35mA
and drops to 3µA in shutdown. The device’s wide output
voltage range (0V to –19.5V) error amplifier operates in
unity-gain and provides virtually constant output noise,
PSRR, bandwidth, and load regulation independent of
the programmed output voltage. Additional features are a
bipolar enable pin, programmable current limit, fast start-
up capability and programmable power good to indicate
output voltage regulation. The regulator incorporates a
tracking function to control an upstream supply to main-
tain a constant voltage across the LT3093 to minimize
power dissipation and optimize PSRR.
Low Dropout Voltage: 190mV
Output Voltage Range: 0V to –19.5V
Programmable Power Good and Fast Start-Up
Bipolar Precision Enable/UVLO Pin
VIOC Pin Controls Upstream Regulator to Minimize
Power Dissipation and Optimize PSRR
Minimum Output Capacitor: 4.7µF Ceramic
12-Lead MSOP and 3mm × 3mm DFN Packages
n
n
APPLICATIONS
The LT3093 is stable with a minimum 4.7µF ceramic out-
put capacitor. Built-in protection includes internal current
limit with foldback and thermal limit with hysteresis. The
LT3093 is available in thermally enhanced 12-Lead MSOP
and 3mm × 3mm DFN Packages.
n
RF and Precision Power Supplies
n
Very Low Noise Instrumentation
n
High Speed/High Precision Data Converters
n
Medical Applications: Diagnostics and Imaging
All registered trademarks and trademarks are the property of their respective owners.
n
Post-Regulator for Switching Supplies
TYPICAL APPLICATION
Power Supply Ripple Rejection
ꢣ0ꢚ
ꢖ.ꢗꢎꢒ
ꢂꢂ.ꢙꢚ
ꢀꢁ0
ꢃ.ꢗꢞꢚ
ꢂ.ꢂꢘ
ꢀ0ꢁ
ꢖꢣ0ꢚ
ꢀꢁꢂ0ꢃꢂ
ꢑꢆ
ꢀ0
ꢄꢅꢁ
ꢆꢇꢈ
ꢏ
ꢑꢆꢒꢓ
ꢀꢏꢐ
ꢙ00ꢚ
ꢔꢕꢁꢄ
ꢔꢕꢁ
ꢖ.ꢗꢎꢒ
ꢀꢁ
ꢘ
ꢔꢕꢁ
ꢌꢂ.ꢂꢘ
ꢍ
ꢌ
ꢀ0
ꢀꢁ
ꢀ0
ꢀꢁ
0
ꢏ
ꢔꢕꢁꢟꢐꢉꢠꢡ
ꢌꢙ00ꢢꢉ
ꢅꢇꢤꢕꢘ
ꢏꢇ
ꢀ
ꢀ ꢁꢂꢃ
ꢀꢁ
R
ꢀ ꢁꢁ.ꢂꢃ
ꢀꢁꢂ
ꢀꢁꢂ
ꢀꢁꢂ
ꢀ
ꢀ ꢁ.ꢂꢃꢄ
ꢀ
ꢀ ꢁ.ꢂꢃꢄ
ꢖ.ꢗꢎꢒ
ꢊ00ꢎꢉ
ꢀ
ꢀ ꢁꢂ00ꢃꢄ
ꢀ
ꢘ
ꢏꢇ
ꢌꢣꢘ
ꢀ0
ꢀ00
ꢀꢁ
ꢀ0ꢁ ꢀ00ꢁ
ꢀꢁ
ꢀ0ꢁ
ꢀRꢁꢂꢃꢁꢄꢅꢆ ꢇꢈꢉꢊ
ꢂ0ꢃꢂ ꢁꢉ0ꢊꢋ
ꢀ0ꢁꢀ ꢂꢃ0ꢄꢅ
ꢑꢏꢇ ꢇꢔꢁ ꢕꢄꢅꢈ ꢏꢇ ꢁꢛꢏꢄ ꢜꢏRꢜꢕꢏꢁꢝ ꢘꢏꢔꢜ
Rev. 0
1
Document Feedback
For more information www.analog.com