UNISONIC TECHNOLOGIES CO., LTD
LR9XXYY
Preliminary
CMOS IC
300mA SMALL DUAL LDO
REGULATOR
DESCRIPTION
The UTC LR9XXYY Series are a low dropout regulator with
high output voltage accuracy, low quiescent current, low dropout,
and high ripple rejection. This regulator is based on a CMOS
process. Each of these regulator ICs contains dual LDO regulator,
both of them includes a voltage reference, an error amplifier,
resistors for setting Output Voltage, a current limit circuit, and a
chip enable circuit.
The UTC LR9XXYY Series exhibit ultra excellent line transient
response and load transient response, thus they are very suitable
for the power supply for hand-held communication equipment.
FEATURES
* Supply Current: TYP. 50μA×2 (VR1&VR2)
* Standby Current: TYP. 0.1μA×2 (VR1&VR2)
* Input Voltage Range: 1.4V~5.25V
* Output Voltage Range: 0.8V~3.7V (0.1V steps)
(For details, please refer to MARK SPECIFICATION TABLE)
* Output Voltage Accuracy: ±1.0% (VSET>2.0V, TOPT=25°C)
* Dropout Voltage: TYP. 0.25V (IOUT=300mA, VSET=2.5V)
* Ripple Rejection: TYP. 75dB (f=1kHz)
* Line Regulation: TYP. 0.02%/V
* Built-in Fold Back Protection Circuit: TYP. 60mA
(Current at short mode)
* Ceramic capacitors are recommended to be used with this IC:
1.0μF or more
ORDERING INFORMATION
Ordering Number
Lead Free
Package
SOT-26
Packing
Tape Reel
Halogen Free
LR9XXYYBL-AG6-R
LR9XXYYBG-AG6-R
Note: XXYY: Output Voltage, refer to Marking Information.
LR9XXYYBG-AG6-R
(1)Packing Type
(1) R: Tape Reel
(2) AG6: SOT-26
(2)Package Type
(3) G: Halogen Free and Lead Free, L: Lead Free
(4) B: without auto-discharge function at off state
(5) YY: refer to Marking Information
(3)Green Package
(4)Discharge Function
(5)Voltage Code at VOUT2
(6)Voltage Code at VOUT1
(6) XX: refer to Marking Information
www.unisonic.com.tw
1 of 5
Copyright © 2019 Unisonic Technologies Co., Ltd
QW-R102-070.d