Document 581-1
Shielded Power Inductors
–
LPS5030
• Very low DCR; excellent current handling
• 4.9 × 4.9 mm footprint; less than 3 mm tall
Designer’s Kit C420 contains 3 each of all values
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 226 – 244 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
DCR SRF
1. Please specify termination and packaging codes:
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
Part number1
LPS5030-105MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
LPS5030-901MR_
LPS5030-122MR_
LPS5030-172MR_
LPS5030-222MR_
LPS5030-332MR_
0.90
1.2
1.7
2.2
3.3
0.040 250
0.043 210
0.051 190
0.057 168
0.066 125
3.8
3.5
3.0
2.9
2.3
4.0
3.6
3.2
3.1
2.5
4.1
3.7
3.3
3.2
2.6
2.10 2.80
2.00 2.65
1.90 2.50
1.60 2.15
1.40 1.80
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
LPS5030-472MR_
LPS5030-562MR_
LPS5030-682MR_
LPS5030-822MR_
LPS5030-103MR_
4.7
5.6
6.8
8.2
0.083
0.089
0.099
0.125
0.127
84
70
56
45
30
1.9
1.8
1.6
1.6
1.4
2.0
1.8
1.7
1.7
1.4
2.0
1.9
1.7
1.7
1.4
1.30 1.75
1.25 1.65
1.20 1.60
1.10 1.55
1.00 1.50
B=Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
10.0
LPS5030-123MR_
LPS5030-153MR_
LPS5030-183MR_
LPS5030-223MR_
LPS5030-333MR_
12.0
15.0
18.0
22.0
33.0
0.155
0.160
0.170
0.190
0.260
24
32
27
24
19
1.3
1.4
1.4
0.95 1.40
0.80 0.90 0.90 0.92 1.40
0.80 0.82 0.87 0.90 1.30
0.70 0.75 0.78 0.88 1.25
0.60 0.63 0.64 0.85 1.20
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
LPS5030-473MR_
LPS5030-683MR_
LPS5030-823MR_
LPS5030-104MR_
LPS5030-124MR_
47.0
68.0
82.0
100
120
0.330
0.440
0.470
0.600
0.800
16
12
11
10
9
0.50 0.53 0.55 0.75 1.00
0.40 0.43 0.44 0.65 0.900
0.38 0.40 0.40 0.60 0.830
0.27 0.31 0.32 0.55 0.750
0.26 0.29 0.30 0.45 0.660
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A impedance analyzer or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
LPS5030-154MR_
LPS5030-224MR_
LPS5030-334MR_
LPS5030-474MR_
LPS5030-564MR_
150
220
330
470
560
0.860
1.35
1.80
2.80
3.20
7.5 0.22 0.25 0.263 0.42 0.570
6.0 0.21 0.235 0.245 0.36 0.500
5.0 0.155 0.155 0.200 0.32 0.420
4.0 0.117 0.134 0.146 0.28 0.370
3.6 0.110 0.130 0.140 0.23 0.320
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient.This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
LPS5030-684MR_
680
3.80
5.10
7.60
10.0
11.0
3.0 0.100 0.120 0.126 0.20 0.290
2.5 0.100 0.110 0.110 0.18 0.250
2.0 0.068 0.080 0.089 0.15 0.210
1.8 0.069 0.081 0.086 0.13 0.170
1.6 0.063 0.074 0.080 0.10 0.150
LPS5030-105MR_ 1000
LPS5030-155MR_ 1500
LPS5030-185MR_ 1800
LPS5030-225MR_ 2200
LPS5030-335MR_ 3300
LPS5030-475MR_ 4700
19.5
26.0
1.3 0.056 0.063 0.067 0.090 0.125
1.1 0.049 0.056 0.059 0.080 0.110
Document 581-1 Revised 09/02/15