LMV112
SNAS297B –MAY 2005–REVISED MAY 2013
www.ti.com
TYPICAL APPLICATION
V
CC
Enable
1
EN1
IN1
8
2
7
OUT1
OUT2
1
LOAD1
LOAD2
VCTCXO
R
R
C
C
load
load
1 nF
LMV112
IN2
3
4
6
2
5
EN2
load
load
Enable
GND
Figure 1.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS(1)(2)
Supply Voltages (V+– V−)
5.5V
(3)
ESD Tolerance
Human Body
2000V
200V
Machine Model
Storage Temperature Range
−65°C to +150°C
+150°C
(4)
Junction Temperature
Soldering Information
Infrared or Convection (35 sec.)
235°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For specifications and the test conditions, see the
Electrical Characteristics Tables.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model: 1.5 kΩ in series with 100 pF. Machine Model: 0Ω in series with 200 pF.
(4) The maximum power dissipation is a function of TJ(MAX), θJA , and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(MAX) − TA) / θJA. All numbers apply for packages soldered directly onto a PC board.
OPERATING RATINGS(1)
Supply Voltage (V+ – V−)
2.4V to 5.0V
(2) (3)
Temperature Range
−40°C to +85°C
(2) (3)
Package Thermal Resistance
WSON-8 (θJA
)
217°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For specifications and the test conditions, see the
Electrical Characteristics Tables.
(2) The maximum power dissipation is a function of TJ(MAX), θJA , and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(MAX) − TA) / θJA. All numbers apply for packages soldered directly onto a PC board.
(3) Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very
limited self-heating of the device such that TJ = TA
.
2
Submit Documentation Feedback
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LMV112