5秒后页面跳转
LMH0074_1 PDF预览

LMH0074_1

更新时间: 2024-01-20 05:37:07
品牌 Logo 应用领域
美国国家半导体 - NSC /
页数 文件大小 规格书
4页 161K
描述
Replacing the CLC012 Adaptive Cable Equalizer with the LMH0074

LMH0074_1 数据手册

 浏览型号LMH0074_1的Datasheet PDF文件第2页浏览型号LMH0074_1的Datasheet PDF文件第3页浏览型号LMH0074_1的Datasheet PDF文件第4页 
National Semiconductor  
Application Note 2002  
Gary Melchior  
Replacing the CLC014  
Adaptive Cable Equalizer  
with the LMH0074  
September 22, 2009  
HD-SDI equalizer and the LMH0344 or LMH0384 3G-SDI  
equalizer. This allows a forward migration path from SD to HD  
to 3G. The LMH0074 also offers a lower supply voltage  
(3.3V), enabling system designers to migrate to lower-power  
designs. The LMH0074 provides a 28% power savings over  
the CLC014, with typical power of 209 mW in comparison with  
280 mW for the CLC014.  
Introduction  
The LMH0074 SD-SDI adaptive cable equalizer can replace  
the CLC014 adaptive cable equalizer in many applications.  
The LMH0074 and CLC014 are both adaptive cable equaliz-  
ers designed to recover data sent over long cables, primarily  
for the SMPTE 259M interface. The supported data rates and  
cable lengths are similar between the two devices. The  
LMH0074 and CLC014 are both rated for industrial tempera-  
ture range operation (-40°C to +85°C).  
Table 1 shows the key differences between the CLC014 and  
LMH0074.  
The LMH0074, the newer generation SDI equalizer, has more  
advanced features and is pin compatible with the LMH0044  
TABLE 1. CLC014 and LMH0074 Key Differences  
CLC014  
LMH0074  
3.3V  
Power Supply (VCC  
Package  
)
5.0V  
14-pin SOIC  
50 to 650 Mbps  
16-pin LLP  
125 to 540 Mbps  
Data Rates  
ESD Rating  
±500V HBM  
±8 kV HBM  
Requires return loss network of 6.8 nH in  
Input Interface  
Requires 100series resistor on each input  
parallel with 75on active input  
Open collector, requires external 75pullups  
Output Structure  
CML with internal 50pullups (to 3.3V)  
to 5V  
AEC Capacitor Value  
Carrier Detect / Mute Polarity  
Other Features  
100 pF  
CD, MUTE  
OEM  
1.0 µF  
CD, MUTE  
MUTEREF, BYPASS  
3. Add an input return loss network consisting of a 6.8 nH  
inductor in parallel with a 75resistor on the active input  
between the BNC and the 75termination.  
4. Removed the 75pullups on the output and replace with  
a 100differential termination located at the input of the  
next stage. The outputs may also be AC coupled, but no  
pullups are required.  
How To Replace the CLC014 with  
the LMH0074  
Replacing the CLC014 with the LMH0074 requires a few sim-  
ple steps. The device packages and pinouts are quite different  
so this change requires a new PCB layout; however, the  
equalizer core and features are similar. To replace the  
CLC014 with the LMH0074, follow these steps:  
5. Replace the 100 pF AEC capacitor with a 1.0 µF AEC  
capacitor.  
1. Change the power supply from 5V to 3.3V.  
Figure 1 shows the typical application for the CLC014, and  
Figure 2 shows the typical application for the LMH0074.  
2. Remove the 100series resistors at the input to the  
equalizer.  
© 2009 National Semiconductor Corporation  
301059  
www.national.com  

与LMH0074_1相关器件

型号 品牌 获取价格 描述 数据表
LMH0074SQ INTERSIL

获取价格

SMPTE 259M / 344M Adaptive Cable Equalizer
LMH0074SQ NSC

获取价格

SMPTE 259M / 344M Adaptive Cable Equalizer
LMH0074SQ/NOPB TI

获取价格

SMPTE 259M/344M 自适应电缆均衡器 | RUM | 16 | -40 to
LMH0074SQE/NOPB TI

获取价格

SMPTE 259M/344M 自适应电缆均衡器 | RUM | 16 | -40 to
LMH0074SQX/NOPB TI

获取价格

SMPTE 259M / 344M Adaptive Cable Equalizer 16-WQFN -40 to 85
LMH020-0850-27G9-00000SS CREE

获取价格

Visible LED
LMH020-0850-27G9-00000TW CREE

获取价格

Cree® LMH2 850-lm and 1250-lm LED Modules wi
LMH020-0850-27G9-00001SS CREE

获取价格

Visible LED
LMH020-0850-27G9-00001TW CREE

获取价格

Visible LED
LMH020-0850-30G9-00000TW CREE

获取价格

Cree® LMH2 850-lm and 1250-lm LED Modules wi