Datasheet > LM2630MTC-ADJ

LM2630MTC-ADJ

更新时间： 2024-02-21 20:16:19

品牌	Logo	应用领域
美国国家半导体 - NSC		开关光电二极管控制器
页数	文件大小	规格书
15页	257K
描述
Synchronous Step-Down Power Supply Controller

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LM2630MTC-ADJ 数据手册

February 1999

LM2630

Synchronous Step-Down Power Supply Controller

General Description

Features

n 4.5V to 30V input range

n Adjustable output (1.8V to 6V)

The LM2630 controller provides all the active functions for

step-down (buck) switching converters. These dc-to-dc con-

verters provide core CPU power in battery-operated sys-

tems.

n 200 kHz to 400 kHz adjustable operating frequency

n Externally synchronizable

High efficiency is achieved by using synchronous rectifica-

tion and pulse-skipping mode operation at light load. Inex-

pensive N-channel MOSFETs are used to reduce system

cost. Bootstrap circuit is used to drive the high-side

N-channel MOSFET.

n On-board power good function

n Precision 1.24V reference output

n 0.8 mA typical quiescent current

n 0.1 µA shutdown current

n Thermal shutdown

n Direct current limit protection

n Input undervoltage lockout

n Output Undervoltage shutdown protection

n Programmable soft-start function

n Tiny TSSOP package

Current mode control scheme is used to improve line regula-

tion and transient response, also provides cycle-by-cycle

current limiting.

The operating frequency is adjustable between 200 kHz and

400 kHz. An external shutdown pin can be used to disable

the device and reduce the quiescent current to 0.1 µA. In low

noise applications, bringing the FPWM pin high can force the

device to operate in constant frequency mode. Other fea- Applications

tures include the external synchronization pin, and the

PGOOD pin to indicate the state of the output voltage.

n Notebook and subnotebook computers

n Cellular phones

Protection circuitry includes thermal shutdown, undervoltage

shut down, soft-start capability, and two levels of current lim-

its: The first level simply limits the load current directly; at the

second level, if the load pulls the output voltage down below

80% of the regulated value, the chip willshut down. This

latched operation is disabled during startup, but an internal

timer will enable it if the output does not come up in the pre-

set time.

n Portable instruments

n Battery-powered digital devices

Typical Application Circuit

DS100120-1

DS100120

www.national.com

12 3 4 5 6 7...15

中文翻译

下载PDF

与LM2630MTC-ADJ相关器件

型号	品牌	获取价格	描述	数据表
LM2630MTC-ADJX	TI	获取价格	SWITCHING CONTROLLER, 345kHz SWITCHING FREQ-MAX, PDSO20, PLASTIC, TSSOP-20
LM2630MTCX-ADJ	ROCHESTER	获取价格	SWITCHING CONTROLLER, 345kHz SWITCHING FREQ-MAX, PDSO20, TSSOP-20
LM2631	NSC	获取价格	Synchronous Step-Down Power Supply Controller
LM2631MTC-ADJ	NSC	获取价格	Synchronous Step-Down Power Supply Controller
LM2631MTC-ADJ/NOPB	TI	获取价格	SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PDSO20
LM2631MTCX-ADJ/NOPB	TI	获取价格	SWITCHING CONTROLLER, 400kHz SWITCHING FREQ-MAX, PDSO20, TSSOP-20
LM2633	NSC	获取价格	Advanced Two-Phase Synchronous Triple Regulator Controller for Notebook CPUs
LM2633MTD	NSC	获取价格	Advanced Two-Phase Synchronous Triple Regulator Controller for Notebook CPUs
LM2633MTD/NOPB	ROCHESTER	获取价格	SWITCHING CONTROLLER, 275kHz SWITCHING FREQ-MAX, PDSO48, TSSOP-48
LM2635	NSC	获取价格	5-Bit Programmable Synchronous Buck Regulator Controller

与LM2630MTC-ADJ相关文章

芯片底部填充工艺：提升电子设备可靠性的关键步骤
2024-08-14

53
REF03GPZ资料解读：主要特征、技术参数、应用场景
2024-08-05

122
一文带你了解DS28E40主要特征、安全特性、应用场景
2024-07-30

169
RT9172资料手册解读：关节特性、引脚信息、参数说明
2024-07-30

152

产品中心

服务支持

精选活动

关于我们

帮助中心

LM2630MTC-ADJ

LM2630MTC-ADJ 数据手册

与LM2630MTC-ADJ相关器件

与LM2630MTC-ADJ相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LM2630MTC-ADJ

LM2630MTC-ADJ 数据手册

与LM2630MTC-ADJ相关器件

与LM2630MTC-ADJ相关文章

您还可以找

您在本页遇到什么问题？