rev 2.0, 03.11.2017
LED34H series
Description
LED34H series are fabricated from narrow band-gap InAs/InAsSbP heterostructures lattice matched to
InAs substrate. This Mid-IR LEDs provide a typical peak wavelength of 3.40 µm, an optical power of typ.
50 µW QCW. There are different options of packaging available, as you can choose between TO-can, with
parabolic reflector (R), window (W), and containing thermoelectric cooler and thermoresistor (T).
Maximum Ratings
Values
Parameter
Symbol
Unit
Min.
Max.
Operating Current, QCW mode
Operating Current, pulsed mode
Storage Temperature *
IQCW max
IPULSE max
ISTR
250
2000
+90
mA
mA
°C
-60
-60
Operating Temperature *
TCASE
+90
°C
Lead Solder Temperature *²
TSLD
+180
°C
* Temperature range may vary for different packaging types
*² must be completed within 5 seconds
Photodiode Characteristics (TCASE=25°C)
Values
Typ.
Parameter
Symbol
Conditions
Unit
Min.
3.30
Max.
Peak Wavelength
λP
∆λ
PO
PO
VOP
ts
IF=150mA QCW
IF=150mA QCW
QCW mode *
3.44
600
µm
nm
µW
µW
V
Half Width (FWHM)
250
45
Optical Output Power, QCW *
Optical Output Power, pulsed *²
Operating Voltage
50
Pulse mode *²
IF=200mA QCW
350
0.2
370
0.8
Switching Time
ns
* Repetition rate: 0.5 kHz, pulse duration: 1 ms, duty cycle: 50%, current: 200 mA
*² Repetition rate: 0.5 kHz, pulse duration: 20 µs, duty cycle: 1%, current: 1 A
Packages
Part Number
Package
LED34H
TO-18 with cap without glass window
TO-18 with parabolic reflector without glass window
LED34H-R
LED34H-RW TO-18 with parabolic reflector with glass window
LED34H-TW TO-5 with built-in thermocooler and thermoresistor, covered by cap with glass window
LED34H-TRW TO-5 with built-in thermocooler and thermoresistor, covered by parabolic reflector with glass window
All parameters refer to LEDs in TO18 package with a cavity and operation at ambient temperature 25°C unless otherwise
stated.
www.roithner-laser.com
1