5秒后页面跳转
LDM2417600 PDF预览

LDM2417600

更新时间: 2022-02-26 09:39:25
品牌 Logo 应用领域
MPD /
页数 文件大小 规格书
4页 607K
描述
LDM24-xx-xxx

LDM2417600 数据手册

 浏览型号LDM2417600的Datasheet PDF文件第1页浏览型号LDM2417600的Datasheet PDF文件第2页浏览型号LDM2417600的Datasheet PDF文件第3页 
Analog Output Current Control (VCNT = 5V)  
www.micropowerdirect.com  
The output current of the unit can also  
be set by adjusting the voltage level on  
the VADJ input to a value between 0.3V to  
1.25V (IOUT will vary from 25% to 100% of  
rated output current). Care must be taken  
not to exceed 1.25V on this input, or the  
driver may be damaged.  
The simple analog circuit at left uses a 15W  
DC/DC converter operating off a 12 VDC  
input line, to keep the input to the LED  
driver at 24 VDC.  
The POL regulator, driven off the same  
input line maintains the control voltage  
(for the VADJ input) at 5 VDC. The resister  
network of R1 and R2 can now be used  
to set the output current level of the LED  
driver. This level is equal to:  
R2  
+
V
ADJ  
X V  
CTRL  
=
R1 R2  
In the second circuit, the input DC/DC has  
been changed to a higher power model,  
and the POL regulator is replaced by the  
shunt regulator (D1) circuit connected in  
parallel with the resistor network. The  
regulator will maintain the voltage across  
R2 and R3 at 2.5 VDC, insuring that the  
1.25 VDC limit on the VADJ pin will not be  
exceeded.  
Analog Output Current Control (5 - 30 VIN)  
When using the analog control input, the  
nominal output current is equal to:  
V
1.25  
ADJ  
I
NOM =IMAX  
x
The VADJ input should be left open if not  
used. Grounding VADJ will shut the unit  
down. Connecting VADJ to directly to +VIN  
may damage the unit.  
Mechanical Dimensions  
Pin Connections  
Pin  
1
Function  
-VIN  
-DC Supply  
2
VADJ  
PWM, On/Off  
7
-LED LED Cathode Connection  
+LED LED Anode Connection  
8
14  
+VIN  
+DC Supply  
Get a full explanation of the  
circuits in this datasheet and  
more in “Driving LEDs”.  
Available free at the MPD website  
Notes:  
All dimensions are typical in inches (mm)  
Tolerance x.xx = 0.02 ( 0.50)  
Pin 1 is marked by a “dot” or indentation on the top of the unit  
MicroPower Direct  
We Power Your Success - For Less!  
292 Page Street Ste D Stoughton, MA 02072  
TEL: (781) 344-8226  
FAX: (781) 344-8481  
E-Mail: sales@micropowerdirect.com  

与LDM2417600相关器件

型号 品牌 描述 获取价格 数据表
LDM24-17-600 MPD Miniature, Wide Input Constant Current DC/DC LED Drivers

获取价格

LDM2420700 MPD LDM24-xx-xxx

获取价格

LDM24-20-700 MPD Miniature, Wide Input Constant Current DC/DC LED Drivers

获取价格

LDM24288MI ETC Optoelectronic

获取价格

LDM24288NI ETC Optoelectronic

获取价格

LDM24488MI ETC Optoelectronic

获取价格