60W Multiple-Stage Output Current LED Power Supply
LCM-60DA series
Features :
Output current level selectable by DIP S.W.
180~295VAC input only
Built-in active PFC function
Protections: Short circuit / Over voltage / Over temperature
Cooling by free air convection
Fully isolated plastic case
Class
power unit, no FG
Built-in DALI interface and push dimming function
Built-in 12V/50mA auxiliary output
Temperature compensation function by external NTC
No load power consumption <1.2W@AC always on
Power supplies synchronization function up to 10 units
Suitable for LED lighting applications
3 years warranty
110
F
M
M
SELV
SPECIFICATION
MODEL
LCM-60DA
SELECTABLE CURRENT Note.3 500mA
600mA
2 ~ 90V
700mA
2 ~ 86V
900mA
2 ~ 67V
1050mA
2 ~ 57V
1400mA
2 ~ 42V
DC VOLTAGE RANGE
2 ~ 90V
60.3W
5%
RATED POWER
RIPPLE CURRENT
OUTPUT
RIPPLE & NOISE (max.) Note.2 700mVp-p
NO LOAD OUTPUT VOLTAGE (max.) 95V
73V
CURRENT ACCURACY
SETUP, RISE TIME
5.0%
Note.6 1000ms, 80ms / 230VAC at rated power
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms/230VAC at rated power
Note.4 180 ~ 295VAC
254 ~ 417VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
47 ~ 63Hz
PF 0.98/230VAC, PF 0.96/277VAC at rated power (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT(Tye.)
LEAKAGE CURRENT
SHORT CIRCUIT
Note.7 92%
0.3A/230VAC
0.25A/277VAC
COLD START 35A/230VAC
<0.5mA / 240VAC
Constant current limiting, recovers automatically after fault condition is removed
105 ~ 125V
OVER VOLTAGE
Protection type : Shutdown o/p voltage, re-power on to recover
PROTECTION
FUNCTION
ENVIRONMENT
90
10 (RTH2)
OVER TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover
12V @ 50mA for driving fan; Tolerance 5%
AUXILIARY POWER
TEMP. COMPENSATION
DIMMING
By external NTC(not provide with the power supply), please see "Temperature compensation operation"
Please see "Dimming Operation"
Please see "Synchronization Operation"
SYNCHRONIZATION
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-30 ~ +60 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
DALI STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
UL8750, ENEC EN61347-1, EN61347-2-13,EN62384 independent approved
IEC62386-101, 102, 207
SAFETY &
EMC
I/P-O/P:3.75KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C( 35% rated power) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A
EMC IMMUNITY
MTBF
K hrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
123.5*81.5*23mm (L*W*H)
0.24Kg
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf parallel capacitor.
3. Please see "DIP switch table".
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. Efficiency is measured at 900mA/67V output set by DIP switch.
8. No load power consumption<1.2W is measured at 180 277VAC.
File Name:LCM-60DA-SPEC 2012-09-11
5秒后页面跳转
塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
英特尔震撼发布：128核心256线程的至强6性能核处理器
SK海力士量产12层HBM3E，容量高达36GB
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
