Datasheet > LCM-120

LCM-120

更新时间： 2024-09-25 03:50:43

品牌	Logo	应用领域
CRANE		/
页数	文件大小	规格书
7页	85K
描述
LINE CONDITIONING MODULE

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

LCM-120 技术参数

生命周期：	Active	包装说明：	,
Reach Compliance Code：	compliant	ECCN代码：	EAR99
风险等级：	5.69	其他特性：	IT CAN ALSO HAVE 12V-24V OUTPUT IN INTERNAL BOOST CONVERTER MODE & 36V-50V IN BUCK CONVERTER MODE
模拟集成电路 - 其他类型：	DC-DC UNREGULATED POWER SUPPLY MODULE	最大输入电压：	50 V
最小输入电压：	12 V	标称输入电压：	28 V
JESD-30 代码：	R-XDMA-X12	功能数量：	1
输出次数：	1	端子数量：	12
最高工作温度：	125 °C	最低工作温度：	-55 °C
最大输出电压：	36 V	最小输出电压：	24 V
标称输出电压：	28 V	封装主体材料：	UNSPECIFIED
封装形状：	RECTANGULAR	封装形式：	MICROELECTRONIC ASSEMBLY
认证状态：	Not Qualified	表面贴装：	NO
技术：	HYBRID	温度等级：	MILITARY
端子形式：	UNSPECIFIED	端子位置：	DUAL
最大总功率输出：	120 W	微调/可调输出：	NO

LCM-120 数据手册

FEATURES

• _55°C to +125°C

LCM-120

120 WATT

INE

ONDITIONING

ODULE

• 12 to 50 VDC input

• Works through transients of

up to 80 V for up to 20 ms.

• Powers DC/DC converters

requiring 28 Vin nominal

• Undervoltage lockout

• Inhibit function

28 VOLT

INPUT

MODEL

LCM-120

Output 24

to 36 VDC

• Sync function

Size (max.): 1.505 x 3.005 x 0.400 inches

(38.23 x 76.33 x 10.16 mm)

See Section B8, case U1, for dimensions.

95 grams max.

Weight:

Screening: Standard or ES. See Section C2 for screening

options, see Section A5 for ordering information.

DESCRIPTION

The LCM-120™ Line Conditioning Module is a non-isolated DC/DC

converter used to extend the input voltage range of Interpoint’s

DC/DC converters. The LCM-120 delivers up to 120 watts of

throughput power from a 12 to 50 volt DC source in one of three

modes:

1. 12 to 24 volts input – internal boost converter delivers 24 volts

2. 24 to 36 volts input – input is connected directly to output

3. 36 to 50 volts input – internal buck converter delivers 36 volts.

converters and opens the output power path while leaving the power

fail flag unaffected. Inhibit is normally left open or pulled up with a

resistor. The sync input allows synchronization of the LCM-120

module’s internal clock to an external pulse source with LSTTL level

voltages and a 40% to 60% duty cycle. When unused, the sync

should be left unconnected. The power fail flag output is a fully

isolated NPN opto-coupler transistor rated to 18 volts DC. It will

drive an external LSTTL load low if the LCM-120 module’s input

voltage drops below 10 volts DC and will remain active until the

module output voltage also drops below 10 volts DC.

CONVERTER DESIGN

The LCM-120 module is protected by internal current limit circuitry

which limits current according to input voltage. This feature also

allows safe charging of large external capacitors. Because current is

sensed between input common and output common there is

normally no external connection made between these pins. (Note: If

an external connection between input and output common is

desired, the resistance of this external connection must be greater

than 1 ohm.) The LCM module will work through up to an 80 volt

transient for up to 120 milliseconds while holding the output at 36

VDC.

LOW VIN AND HEAVY LOADS

When the LCM-120 module is operated at 12 volts in and 120 watts

output, line loss can become a major concern. The module will

output 24 volts at 120 watts. Allowing for efficiency, the input current

will be [(120 watts / 0.88 / 12] = 11.36 A. If the resistance in the line

from the power source to the LCM-120 is 0.05 ohms, the line loss at

12 volts from the power source will be (0.05 • 11.36) = 0.57 volts.

The LCM-120 module will see 11.43 volts and will not start up.

EXTERNAL CAPACITANCE

FEATURES

Interpoint recommends a minimum output capacitance of 330 uF

and a total ESR of at least 0.25 ohms to ensure stability of the LCM-

120 module’s boost converter. For very low ESR capacitors, an

external series resistor (non-inductive) may be used to obtain the

minimum total ESR. The maximum recommended capacitance is

1F.

Features include an under voltage lockout, an inhibit input, a

synchronization input and a power fail flag output. Under voltage

lockout prevents start-up for inputs less than 12 volts DC and will

shut down the converter for an input of less than 10 volts DC. The

inhibit input, when connected to input common, disables the internal

B6-9

12 3 4 5 6 7

中文翻译

下载PDF

与LCM-120相关器件

型号	品牌	获取价格	描述	数据表
LCM-120/ES	ETC	获取价格	SMPS Controller
LCM-120ES	CRANE	获取价格	LINE CONDITIONING MODULE 28 VOLT INPUT
LCM1210R2	ETC	获取价格	Molded Chip Inductor
LCM1500L	ARTESYN	获取价格	1500 Watt Bulk Front End
LCM1500N	ARTESYN	获取价格	1500 Watt Bulk Front End
LCM1500N-T	ARTESYN	获取价格	AC/DC CONVERTER 15V 1500W
LCM1500Q	ARTESYN	获取价格	1500 Watt Bulk Front End
LCM1500R	ARTESYN	获取价格	1500 Watt Bulk Front End
LCM1500R-T-8	ARTESYN	获取价格	AC/DC CONVERTER 28V 1500W
LCM1500U	ARTESYN	获取价格	1500 Watt Bulk Front End

与LCM-120相关文章

SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

11
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

14
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
2024-09-18

81
贸泽上架Tallysman TW5386智能GNSS天线
2024-09-18

72

产品中心

服务支持

精选活动

关于我们

帮助中心

LCM-120

LCM-120 技术参数

LCM-120 数据手册

与LCM-120相关器件

与LCM-120相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LCM-120

LCM-120 技术参数

LCM-120 数据手册

与LCM-120相关器件

与LCM-120相关文章

您还可以找

您在本页遇到什么问题？