L-CM012-C6N
8/8
SPECIFICATIONS
(5) Assembly
- Thermal conductive silicone grease should be applied to the whole rear surface so that this
product can dissipate heat as a whole. However, the use of insulating paste is strongly
recommended in order to avoid short circuit.
Insufficient heat dissipation may reduce the life of this product significantly.
- Please be careful not to apply any stress to the product during the clamping operation.
As the connection status could vary depending on materials of outer heat sink, please check
thoroughly.
- Please be aware that this product should not come into contact with any other parts in
assembled.
- The aluminum-based PWB is used for this product. As the attachment to any materials that
have greatly different thermal expansion coefficient from that of this product could trigger
crack or drop because of thermal expansion or shrinkage, advance check is required.
- As for cleaning, please preliminarily confirm using an intended equipment if this product is free
from any reliability concerns.
The residues left after cleaning may cause not only the reduction in surface resistance but also
the corrosion of electrode parts and consequently lead to the deterioration of reliability.
- This product has connectors.
Use recommended wires suitable for the connectors at the time of assembly.
Use soldering lands on this product when needed.
/ Land size : 4 × 2 [mm]
/ Soldering operation should be performed within 3.5 seconds per land.
The temperature of a soldering iron should be adjusted 350degC or lower.
No external force is applied to sealing resin during soldering operation.
Please do not handle a product until it returns to a normal temperature.
Note: This product is not adaptable to reflow process.
(6) Others
- This product is intended for application in general electric devices (such as office automation
equipment, communication devices, audio-video equipment, home electrical appliances,
measurement hardware and others). In cases where this product is used for the following
applications that require high reliability or could derectly affect human life, health and
property due to failure or malfunction, please consult our sales representatives beforehand.
1. Aerospace hardware 2. Submarine equipment 3. Power plant control instrument
4. Medical equipment 5. Transport machine (automobile,train,vessel)
6. Traffic signal instrument 7. Security/disaster-prevention equipment
8. Information processing devices 9. Other devices equivalent to 1 through 8
- Our warranty does not cover situations where this product undergoes secondary fabrication
such as change in shape.
- This product complies with RoHS directives.
- The agreement of formal product specification is required prior to mass production.
- The specifications and appearance of this product are subject to change without advanced notice.
△
△
△
DESCRIPTION
MARK
QTY
DATE
ENGINEER
Form No.GQP-0013-F09-1
(UQP-U013-F03-0)
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P666 03/10