Data Sheet
GE
KBVW006A0B Series (Sixteenth-Brick) DC-DC Converter Power Modules
36–75Vdc Input; 12.0Vdc Output; 6A Output Current
Features
BARRACUDA* SERIES
.
.
.
.
.
.
.
.
.
.
Wide input voltage range: 36-75 Vdc
Monotonic startup into prebiased load
Output Voltage adjust: 80% to 110% of Vo,nom
Remote sense
Constant switching frequency
Positive remote On/Off logic
Input under/over voltage protection
Output overcurrent and overvoltage protection
Over-temperature protection
RoHS Compliant
Industry standard, DOSA compliant footprint
33.0 mm x 22.9 mm x 9.3 mm
(1.30 x 0.90 x 0.366 in)
.
.
.
.
.
Low profile height and reduced component skyline
Applications
High efficiency: 91.0%
.
.
.
.
Distributed Power Architectures
Wireless Networks
Wide operating temperature range (-40°C to 85°C)
Compliant to RoHS EU Directive 2002/95/EC (-Z versions)
Access and Optical Network Equipment
Industrial Equipment
Compliant to ROHS EU Directive 2002/95/EC with lead
solder exemption (non-Z versions)
.
.
Compliant to IPC-9592A (May 2010), Category 2, Class II
UL# 60950-1, 2nd Ed. Recognized, CSA† C22.2 No.
60950-1-07 Certified, and VDE‡ (EN60950-1, 2nd Ed.)
Licensed
Options
.
Negative Remote On/Off logic (preferred)
.
.
CE mark meets 2006/95/EC directive§
.
Over current/Over temperature/Over voltage protections
(Auto-restart) (preferred)
Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for Basic
insulation rating per EN60950-1
.
.
.
Surface Mount version (-S)
Heat Plate version (-H)
.
.
2250 Vdc Isolation tested in compliance with IEEE 802.3¤
PoE standards
For additional options, see Table 2 (Device Options) under
“Ordering Information” section.
ISO**9001 and ISO 14001 certified manufacturing
facilities
Description
The KBVW006A0B, Sixteenth-brick low-height power module is an isolated dc-dc converters that can deliver up to 6A of output
current and provide a precisely regulated output voltage of 12.0V over a wide range of input voltages (VIN = 36 - 75Vdc). The
modules achieve typical full load efficiency of 91%. The open frame modules construction, available in both surface-mount and
through-hole packaging, enable designers to develop cost and space efficient solutions.
*
Trademark of General Electric Company
# UL is a registered trademark of Underwriters Laboratories, Inc.
CSA is a registered trademark of Canadian Standards Association.
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
†
‡
§ This product is intended for integration into end-user equipment. All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
July 9, 2013
©2012 General Electric Company. All rights reserved.