Datasheet > JWM22RBB/UCV

JWM22RBB/UCV

更新时间： 2023-09-24 09:25:39

品牌	Logo	应用领域
日本长野 - NKK		/
页数	文件大小	规格书
9页	312K
描述
JW-Series High Inrush 10 & 16 Amp Rocker Switches

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

JWM22RBB/UCV 数据手册

Series JW

High Inrush 10 & 16 Amp Rockers

PRECAUTIONS FOR HANDLING & STORAGE FOR JWMW/LW (PANEL SEAL TYPES)

Operating Environment

• Do not install switch where heavy dust collection occurs. Dust build-up under rocker may affect switch actuation.

• Do not actuate switch if submerged in water or oil.

30°

• Installation is not recommended on horizontal surface in an environment where frequent splashing of

water may occur. In such an environment, a minimum 30° angle installation is advisable. If there is

a possibility of freezing, install vertically so no moisture will be retained within switch housing.

Panel Mounting

Incorrect

Correct

• Before snapping a switch into the panel, align the gasket evenly under bezel of the switch.

• When mounting into a panel, apply equal pressure to sides of bezel and insert parallel to panel.

• After mounting a switch, be sure there are no gaps between switch and panel.

Lightly push into panel.

• After installing into panel, do not apply excessive force.

• After panel installation and wiring is completed, do not apply force horizontally

or vertically from behind panel.

Clean Edges

• Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint to collect in

corners of cutout to prevent level mounting.

• Avoid reinstalling a switch once it has been mounted in a panel. This may cause deterioration of panel sealability.

B48

www.nkkswitches.com

1...6 7 89

下载PDF