5秒后页面跳转
JCK2048S15 PDF预览

JCK2048S15

更新时间: 2024-10-03 00:48:43
品牌 Logo 应用领域
XPPOWER /
页数 文件大小 规格书
2页 294K
描述
20 Watts JCK Series

JCK2048S15 数据手册

 浏览型号JCK2048S15的Datasheet PDF文件第2页 
xppower.com  
20 Watts  
JCK Series  
2:1 Input Range  
ꢀ40 °C to +100 °C Operating Temperature  
Single & Dual Outputs  
Remote On/Off  
High Efficiency ꢀ up to 93%  
1600 VDC Isolation  
3 Year Warranty  
Specification  
Input  
General  
Input Voltage Range  
• 12 V (9-18 VDC)  
24 V (18-36 VDC)  
48 V (36-75 VDC)  
Efficiency  
Isolation  
• See table  
• 1600 VDC Input to Output  
1600 VDC Input to Case  
1600 VDC Output to Case  
Input Current  
• See table  
Undervoltage Lockout • 12 V models: ON 8.6 V, OFF 7.9 V typical  
24 V models: ON 17.8 V, OFF 16 V typical  
Isolation Capacitance • 1200 pF typical  
9
Isolation Resistance  
Switching Frequency  
Power Density  
MTBF  
• 10 min  
48 V models: ON 33.5 V, OFF 30.5 V typical  
• 330 kHz typical  
Input Surge  
• 12 V models 36 VDC for 100 ms  
24 V models 50 VDC for 100 ms  
48 V models 100 VDC for 100 ms  
3
• 25 W/in  
• >680 kHrs minimum to MIL-HDBK-217F  
at 25 °C, GB  
Environmental  
Output  
Operating Temperature • -40 °C to +100 °C, derate from 100% load  
Output Voltage  
Output Voltage Trim  
Minimum Load  
• See table  
at +70 °C to 0% load at +100 °C  
10% max on single outputs  
• No minimum load required  
• 0.5% max  
Case Temperature  
Cooling  
• +100 °C max  
• Convection-cooled  
Line Regulation  
Load Regulation  
Operating Humidity  
• Up to 95% RH, non-condensing  
• Single output models: 0.5% max  
Dual output models: 1% max  
balanced outputs  
Storage Temperature • -40 °C to +125 °C  
Cross Regulation  
Setpoint Accuracy  
Start Up Delay  
5% for dual outputs (see note 2)  
1% max  
EMC  
Emissions  
• EN55022, Class A conducted  
& radiated with external components,  
see application note  
• EN61000-4-2, 8 kV air, 6 kV contact,  
Perf Criteria A  
• EN61000-4-3 10 V/m, Perf Criteria A  
• EN61000-4-4 level 3, Perf Criteria B*  
• EN61000-4-5 level 2, Perf Criteria B*  
• EN61000-4-6 10 V/rms,Perf Criteria A  
• EN61000-4-8 1 A/m, Perf Criteria A  
• <20 ms  
• <5 ms  
• 75 mV pk-pk (see note 3)  
Start Up Rise Time  
Ripple & Noise  
ESD Immunity  
Transient Response  
3% max deviation, recovery to within  
1% in 250 µs for a 25% load change  
Radiated Immunity  
EFT/Burst  
Temperature  
Coefficient  
• 0.02%/°C  
Surge  
Overvoltage Protection • 3.3 V models: 3.9 V typical  
5 V models: 6.2 V typical  
Conducted Immunity  
Magnetic Field  
12 V models: 15 V typical  
15 V models: 18 V typical  
12 V models: 15 V typical  
15 V models: 18 V typical  
*External input capacitor required 220 µF/100 V.  
Overload Protection  
• >140% of full load at nominal input  
Short Circuit Protection • Trip & restart (hiccup mode), auto recovery  
Remote On/Off  
Capacitive Load  
• On = Logic High (>3.0 V) or Open  
Off = Logic Low (<1.2 V) or short pin 2 to  
pin 6  
• See table  

与JCK2048S15相关器件

型号 品牌 获取价格 描述 数据表
JCK2048S3V3 XPPOWER

获取价格

20 Watts JCK Series
JCK-24R ETC

获取价格

Fuse
JCK-2R ETC

获取价格

Fuse
JCK30 XPPOWER

获取价格

30 Watts JCK Series
JCK3012D05 XPPOWER

获取价格

2 1 Input Range
JCK3012D12 XPPOWER

获取价格

2 1 Input Range
JCK3012D15 XPPOWER

获取价格

2 1 Input Range
JCK3012S05 XPPOWER

获取价格

2 1 Input Range
JCK3012S12 XPPOWER

获取价格

2 1 Input Range
JCK3012S15 XPPOWER

获取价格

2 1 Input Range