ISL62386
®
Data Sheet
February 4, 2009
FN6831.0
High-Efficiency, Quad Output System
Power Supply Controller for Notebook
Computers
Features
3
• High Performance R Technology
• Fast Transient Response
The ISL62386 controller generates supply voltages for
battery-powered systems. The ISL62386 includes two
pulse-width modulation (PWM) controllers, adjustable from
0.6V to 5.5V, and two linear regulators, LDO5 and LDO3,
that generate a fixed 5V output and a fixed 3.3V output
respectively. Each can deliver up to 100mA. The Channel 2
switching regulator will automatically take over the LDO5
load when programmed to 5V output. This provides a large
power saving and boosts efficiency. The ISL62386 includes
on-board power-up sequencing, one power-good (PGOOD)
output, digital soft-start, and an internal soft-stop output
discharge that prevents negative voltages on shutdown.
• ±1% Output Voltage Accuracy: -10°C to +100°C
• Two Fully Programmable Switch-Mode Power Supplies
with Independent Operation
• Programmable Switching Frequency
• Integrated MOSFET Drivers and Bootstrap Diode
• Fixed +3.3V LDO Output with Enable Control
• Fixed +5V LDO with Automatic Switchover to SMPS2
• Internal Soft-Start and Soft-Stop Output Discharge
• Wide Input Voltage Range: +5.5V to +25V
• Full and Ultrasonic Pulse-Skipping Mode
• Power-Good Indicator
3
The patented R PWM control scheme provides a low jitter
system with fast response to load transients. Light-load
efficiency is improved with period-stretching discontinuous
conduction mode (DCM) operation. To eliminate noise in
audio frequency applications, an ultrasonic DCM mode is
included, which limits the minimum switching frequency to
approximately 28kHz.
• Overvoltage, Undervoltage and Overcurrent Protection
• Thermal Monitor and Protection
• Pb-Free (RoHS Compliant)
Applications
The ISL62386 is available in a 32 Ld 5x5 TQFN package,
and can operate over the extended temperature range
(-10°C to +100°C).
• Notebook and Sub-Notebook Computers
• PDAs and Mobile Communication Devices
• 3-Cell and 4-Cell Li+ Battery-Powered Devices
• General Purpose Switching Buck Regulators
Ordering Information
PART
NUMBER
(Note)
TEMP
RANGE
(°C)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
Pinout
ISL62386HRTZ
62386 HRTZ -10 to +100 32 Ld 5x5 TQFN L32.5x5A
ISL62386
(32 LD 5X5 TQFN)
TOP VIEW
ISL62386HRTZ-T* 62386 HRTZ -10 to +100 32 Ld 5x5 TQFN L32.5x5A
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant
and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures
that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
32 31 30 29 28 27 26 25
BOOT2
LGATE2
PGND
LDO5
PGOOD
FSET2
FCCM
1
2
3
4
5
6
7
8
24
23
22
21
20
19
18
17
AGND2
VCC
THERMAL PAD
(AGND)
VIN
LDO3
AGND1
LDO3EN
FSET1
LGATE1
BOOT1
9
10 11 12 13 14 15 16
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.