ISL55141, ISL55142, ISL55143
®
Data Sheet
July 17, 2006
FN6230.0
High-Speed 18V CMOS Comparators
Features
ISL55141, ISL55142, ISL55143 integrated circuits are
high-speed, wide input common-mode range comparators.
They provide three-state window comparators in a high
voltage CMOS process (18V). Each comparator has dual
• 18V I/O range
• 65MHz operation
• 9.5ns typical propagation delay
• Programmable input thresholds
• User defined comparator output levels
• Common-mode range includes negative rails
• Small footprints in QFN packages
• Power-down current <10µA
receive thresholds, CV and CV , for establishing
A
B
minimum 1-V and maximum 0-V voltage levels. These
IH IL
devices can accept inputs from a number of logic families,
such as TTL, ECL, CMOS, LVCMOS, LVDS and CML. Two
bits of output per comparator provide the test controller with
qualification of a comparator input into three states. The two
output bits work with a separate user supply to establish
V
, V levels compatibility with the system’s controller
OH OL
• Pb-free plus anneal available (RoHS compliant)
logic levels.
Applications
• Burn in ATE
Fast propagation delay (9.5ns typical at ±50mV overdrive)
makes this family compatible with high-speed digital test
systems. The 18V range enables the comparator input to
operate over a wide input range. Two references per input
enable and three state digitization of input with voltage
swings of up to 13V common mode. The operating
frequency of these devices is typically 65MHz.
• Low cost ATE
• Fast supervisory power control
• Instrumentation
Ordering Information
High voltage CMOS process makes these devices ideal for
large voltage swing applications, such as special test
voltages levels associated with Flash devices or power
supervision applications and may avoid the need for test bus
isolation relay(s).
PART
PART
TEMP.
PKG.
DWG. #
NUMBER
MARKING RANGE (°C) PACKAGE
ISL55141IRZ* 55141IRZ
(See Note)
-40 to +85 16 Ld QFN
(Pb-free)
L16.4X4A
ISL55141IVZ* 55141IVZ
(See Note)
-40 to +85 14 Ld TSSOP M14.173
(Pb-free)
Functional Block Diagram
DUAL LEVEL COMPARATOR - RECEIVERS
ISL55142IRZ* 55142IRZ
(See Note)
-40 to +85 20 Ld QFN
(Pb-free)
L20.5x5
V
CC
V
OH
ISL55142IVZ* 55142IVZ
(See Note)
-40 to +85 20 Ld TSSOP M20.173
(Pb-free)
Q
AX
CV
CV
AX
V
OL
ISL55143IRZ* 55143IRZ
(See Note)
-40 to +85 36 Ld TQFN L36.6X6
(Pb-free)
V
V
EE
V
INPX
CC
V
OH
OL
* Add “-T” suffix for tape and reel.
Q
BX
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
BX
V
V
EE
x denotes 1, 2 or 4 channels for ISL55141, ISL55142 and ISL55143,
respectively
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.