ISL1572
®
Data Sheet
July 2, 2009
FN6536.2
Power Line Communication (PLC)
Features
The ISL1572 is a dual operational amplifier designed for
PLC line driving in OFDM and SSC based solutions. This
device features a high drive capability of 750mA while
consuming only 6mA of supply current per amplifier and
operating from a single 4.5V to 12V supply. The driver
achieves a typical distortion of -80dBc, at 150kHz into a 25Ω
load.
• 21dBm output power capability
• Drives up to 750mA from a +12V supply
• 20V
differential output drive into 21Ω
• Very low noise floor
P-P
• -75dBc typical driver output distortion at 4MHz
• -80dBc typical driver output distortion at 10MHz
• -79dBc typical driver output distortion at 17MHz
• Low quiescent current of 6mA per amplifier
The ISL1572 is available in the thermally-enhanced
16 Ld QFN or 10 Ld HMSOP package and is specified for
operation over the full -40°C to +85°C temperature range.
The ISL1572 has control pins BIAS and BIAS for
0
1
• Supply range
controlling the bias and enable/disable of the outputs. These
controls allow for lowering the power to fit the
performance/power ratio for the application.
- For ISL1572IUEZ 4.5V to 12V
- For ISL1572IRZ ±2.25V to ±6V, 4.5V to 12V
• 250MHz bandwidth
• Thermal shutdown
Get Full Datasheet
• Pb-free (RoHS compliant)
Applications
• UPA digital home standard
Ordering Information
PART NUMBER
(Note)
PART
MARKING
TEMP. RANGE
PACKAGE
(Pb-Free)
PKG.
DWG. #
(°C)
ISL1572IRZ
157 2IRZ
-40 to +85
-40 to +85
-40 to +85
-40 to +85
16 Ld QFN
MDP0046
ISL1572IRZ-T7*
ISL1572IUEZ
157 2IRZ
BBBFA
BBBFA
16 Ld QFN (Tape and Reel)
10 Ld HMSOP
MDP0046
MDP0050
ISL1572IUEZ-T7*
10 Ld HMSOP (Tape and Reel) MDP0050
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations).
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2008, 2009. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.