IR213(6,62,63,65,66,67,68)(J&S) & PbF
Data Sheet No. PD60166 revU
IR2136/IR21362/IR21363/IR21365/
IR21366/IR21367/IR21368 (J&S) & (PbF)
3-PHASE BRIDGE DRIVER
Packages
Features
•
•
•
•
Floating channel designed for bootstrap operation
Fully operational to +600 V
Tolerant to negative transient voltage, dV/dt immune
Gate drive supply range from 10 V to 20 V (IR2136/
IR21368), 11.5 V to 20 V (IR21362D), or 12 V to 20 V
(IR21363/IR21365/IR21366/IR21367)
28-Lead SOIC
28-Lead PDIP
•
•
•
•
•
•
Undervoltage lockout for all channels
Over-current shutdown turns off all six drivers
Independent 3 half-bridge drivers
Matched propagation delay for all channels
Cross-conduction prevention logic
Low side output out of phase with inputs. High side outputs
out of phase (IR213(6,63, 65, 66, 67, 68)), or in phase
(IR21362) with inputs
44-Lead PLCC w/o 12 Leads
•
•
•
•
3.3 V logic compatible
Lower di/dt gate drive for better noise immunity
Externally programmable delay for automatic fault clear
All parts are LEAD-FREE
Feature Comparison: IR213(6,62,63,65,66,67,68)
Description
Part
IR2136
IR21362
IR21363
IR21365
IR21366
IR21367
IR21368
The IR2136x (J&S) are high voltage, high
speed power MOSFET and IGBT drivers with
three independent high and low side
referenced output channels for 3-phase
applications. Proprietary HVIC technology
enables ruggedized monolithic construction.
Logic inputs are compatible with CMOS or
LSTTL outputs, down to 3.3 V logic. A current
trip function which terminates all six outputs
___ ___
HIN, LIN
___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
___ ___
HIN, LIN
Input Logic
Ton (typ.)
Toff (typ.)
400 ns
380ns
400 ns
380 ns
400 ns
380 ns
400 ns
380 ns
250 ns
180 ns
250 ns
180 ns
400 ns
380 ns
VIH (typ.)
VIL (typ.)
2.7 V
1.7 V
0.46 V
8.9 V
8.2 V
2.7 V
1.7 V
2.7 V
1.7 V
2.7 V
1.7 V
2.0 V
1.3 V
2.0 V
1.3 V
2.0 V
1.3 V
4.3 V
8.9 V
8.2 V
Vitrip+
0.46 V
10.4 V
9.4 V
0.46 V
11.2 V
11.0 V
4.3 V
0.46 V
11.2 V
11.0 V
4.3 V
UVCC/BS+
UVCC/BS-
11.2 V
11.0 V
11.2 V
11.0 V
can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An
open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault
conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output
drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to
simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the
high side configuration which operates up to 600 V.
Typical Connection
www.irf.com
1