IMP2119
DATA
C
OMMUNICATIONS
Key Features
9-Line ULTRA3 LVD/SE
SCSI Terminator
ꢀ Auto-selectable LVD or single-ended termination
ꢀ 3.0pF maximum disabled output capacitance
ꢀ Fast response, no external capacitors required
ꢀ Compatible with active negation drivers
ꢀ 15µA supply current in disconnect mode
ꢀ Logic command disconnects all termination lines
ꢀ DIFFSENSE line driver
The IMP2119 is a multimode SCSI terminator that conforms to the SCSI
Parallel Interconnect-2 (SPI-2) specification developed by the T10 stan-
dards committee for low voltage differential (LVD) termination.
Multimode compatibility permits the use of legacy devices on the bus
without hardware alterations. Automatic mode selection is achieved
through voltage detection on the diffsense line.
The IMP2119 delivers the ultimate in SCSI bus performance while saving
component cost and board area. Elimination of the external capacitors
also mitigates the need for a lengthy capacitor selection process. The indi-
vidual high bandwidth drivers also maximize channel separation and
reduce channel to channel noise and cross talk. The high bandwidth
architecture insures ULTRA3 performance.
ꢀ Ground driver integrated for single-ended
operation
ꢀ Current limit and thermal protection
ꢀ Hot-swap compatible (single-ended)
ꢀ Compatible with SCSI, SPI-2, SPI-3, SPI-4
When the IMP2119 is enabled, the differential sense (DIFFSENSE) pin
supplies a voltage between 1.2V and 1.4V. In application, this pin is tied
to the DIFFSENSE input of the corresponding LVD transceivers. This
action enables the LVD transceiver function. DIFFSENSE is capable of
supplying a maximum of 15mA. Tying the DIFFSENSE pin HIGH places
the IMP2119 in a high impedance state indicating the presence of an
HVD device. Tying the pin LOW places the part in a single-ended mode
while also signaling the multimode transceiver to operate in a single-
ended mode.
ULTRA160 and ULTRA320
ꢀ Pin compatible with DS2119
sleep/ disable mode, the DIFFSENSE function is disabled
and is placed in a high impedance state.
Another key feature of the IMP2119 is the master/ slave
function. Driving this pin HIGH or floating the pin enables
the 1.3V DIFFSENSE reference. Driving the pin LOW dis-
ables the on board DIFFSENSE reference and enables use
of an external master reference device.
Recognizing the needs of portable and configurable peripherals, the
IMP2119 have a TTL compatible sleep/ disable mode. During this
sleep/ disable mode, power dissipation is reduced to a meager 15µA
while also placing all outputs in a high impedance state. Also during
Block Diagram
1 of 9
SE 2.85V, 22.5mA
TPWR
Power ON
Internal VREF
1.30V
ISO
SE
2.2V
1.07mA
SE
LVD(-) / SE
DISC/HVD
200
52.5
LVD
1.25V
SE
LVD
HVD
LVD(+) / SE
(Pseudo-GND)
52.5
M/S
LVD
10mA
20
1.07mA
MODE Control & Delay
SE
Window
Comp.
Latch
HVD
DIFFSENSE
SE
HVD
LVD
20kΩ
LVD
DIFF_CAP
Power ON & MODE Delay
Power ON
© 2002 IMP, Inc.
Data Communications
1
5秒后页面跳转
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
一文带你解读74HC244资料手册：特性、应用场景、封装方式、引脚配置说明、电气参数、推荐替代型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
