5秒后页面跳转
ICX228AL PDF预览

ICX228AL

更新时间: 2024-01-03 15:07:00
品牌 Logo 应用领域
索尼 - SONY 传感器摄像机
页数 文件大小 规格书
17页 198K
描述
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for EIA B/W Video Cameras

ICX228AL 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:ActiveReach Compliance Code:unknown
风险等级:5.62其他特性:ELECTRONIC SHUTTER
阵列类型:INTERLINE主体宽度:10.16 mm
主体高度:3.35 mm主体长度或直径:10 mm
水平像素:811外壳:PLASTIC
安装特点:THROUGH HOLE MOUNT最大工作电流:5.5 mA
最高工作温度:60 °C最低工作温度:-10 °C
光学格式:1/4 inch输出类型:ANALOG VOLTAGE
封装形状/形式:SQUARE像素大小:4.75X5.55 µm
电源:12 V传感器/换能器类型:IMAGE SENSOR,CCD
光谱响应 (nm):400-1000子类别:CCD Image Sensors
最大供电电压:12.36 V最小供电电压:11.64 V
表面贴装:NO端接类型:SOLDER
垂直像素:508Base Number Matches:1

ICX228AL 数据手册

 浏览型号ICX228AL的Datasheet PDF文件第7页浏览型号ICX228AL的Datasheet PDF文件第8页浏览型号ICX228AL的Datasheet PDF文件第9页浏览型号ICX228AL的Datasheet PDF文件第11页浏览型号ICX228AL的Datasheet PDF文件第12页浏览型号ICX228AL的Datasheet PDF文件第13页 
ICX228AL  
4. Video signal shading  
Set to standard imaging condition III. With the lens diaphragm at F5.6 to F8, adjust the luminous intensity  
so that the average value of the signal output is 200mV. Then measure the maximum (Vmax [mV]) and  
minimum (Vmin [mV]) values of the signal output and substitute the values into the following formula.  
SH = (Vmax Vmin)/200 × 100 [%]  
5. Dark signal  
Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature 60°C and  
the device in the light-obstructed state, using the horizontal idle transfer level as a reference.  
6. Dark signal shading  
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark  
signal output and substitute the values into the following formula.  
Vdt = Vdmax Vdmin [mV]  
7. Flicker  
Set to standard imaging condition II. Adjust the luminous intensity so that the average value of the signal  
output is 200mV, and then measure the difference in the signal level between fields (Vf [mV]). Then  
substitute the value into the following formula.  
F = (Vf/200) × 100 [%]  
8. Lag  
Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it  
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following  
formula.  
Lag = (Vlag/200) × 100 [%]  
FLD  
V1  
Light  
Strobe light  
timing  
Signal output 200mV  
Vlag (lag)  
Output  
10 –  

与ICX228AL相关器件

型号 品牌 描述 获取价格 数据表
ICX229 SONY Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras

获取价格

ICX229AK SONY Diagonal 4.5mm (Type 1/4) CCD Image Sensor for PAL Color Video Cameras

获取价格

ICX229AL SONY Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras

获取价格

ICX232 SONY Timing Generator and Signal Processor for Frame Readout CCD Image Sensor

获取价格

ICX232BQ ETC Diagonal 5mm(Type 1/3.6) Frame Readout CCD Image Sensor with Square Pixel for Color Camera

获取价格

ICX238 SONY Diagonal 3mm (Type 1/6) CCD Image Sensor for NTSC Color Cameras

获取价格