HV9911
Switch-Mode LED Driver IC with High Current Accuracy
Features
General Description
The HV9911 is an LED driver IC designed to control
single-switch PWM converters (buck, boost,
buck-boost and SEPIC) in a Constant Frequency or
Constant Off-time mode. The controller uses a peak
current control scheme with programmable slope
• Switch-mode Controller for Single-switch Drivers:
- Buck
- Boost
- Buck-boost
- SEPIC
compensation
and
includes
an
internal
transconductance amplifier to control the output current
in closed loop, enabling high output current accuracy.
In the Constant Frequency mode, multiple HV9911s
can be synchronized with each other or with an
external clock using the sync pin. Programmable
MOSFET current limit enables current limiting during
Input Undervoltage and Output Overload conditions.
The IC also includes a 0.2A source and 0.4A sink gate
driver for high-power applications. An internal
9V–250V linear regulator powers the IC, eliminating the
need for a separate power supply. The HV9911
provides a TTL-compatible PWM dimming input that
can accept an external control signal with a duty ratio
of 0%–100% and a frequency of up to a few kilohertz.
The IC also provides a FAULT output which, can be
used to disconnect the LEDs in case of a Fault
condition, using an external disconnect FET.
• Works with High-side Current Sensing
• Closed-loop Control of Output Current
• High Pulse-Width Modulation (PWM) Dimming
Ratio
• Internal 250V Linear Regulator (can be extended
using external Zener Diodes)
• Internal 2% Voltage Reference (0°C < TA < 85°C)
• Constant Frequency or Constant Off-time
Operation
• Programmable Slope Compensation
• Logic Input for Enable and PWM Dimming
• +0.2A/-0.4A Gate Driver
• Output Short-circuit Protection
• Output Overvoltage Protection
• Synchronization Capability
• Programmable Metal-Oxide Semiconductor
Field-Effect Transistor (MOSFET) Current Limit
The HV9911-based LED driver is ideal for RGB
backlight applications with DC inputs. HV9911-based
LED lamp drivers can achieve efficiency in excess of
90% for buck and boost applications.
Applications
• RGB Backlight Applications
• Battery-powered LED Lamps
• Other DC/DC LED Drivers
Package Type
16-lead SOIC
(Top view)
1
2
3
4
5
6
7
8
16
VIN
FDBK
IREF
15
14
13
12
11
10
9
VDD
GATE
COMP
PWMD
OVP
GND
CS
SC
FAULT
REF
RT
SYNC
CLIM
See Table 2-1 for pin information.
2017 Microchip Technology Inc.
DS20005580A-page 1