5秒后页面跳转
HV853 PDF预览

HV853

更新时间: 2024-01-22 18:18:45
品牌 Logo 应用领域
美国微芯 - MICROCHIP /
页数 文件大小 规格书
7页 603K
描述
HV853 is a high voltage, low noise EL (electroluminescent) lamp driver. It is the low noise versio

HV853 数据手册

 浏览型号HV853的Datasheet PDF文件第1页浏览型号HV853的Datasheet PDF文件第2页浏览型号HV853的Datasheet PDF文件第3页浏览型号HV853的Datasheet PDF文件第4页浏览型号HV853的Datasheet PDF文件第6页浏览型号HV853的Datasheet PDF文件第7页 
HV853  
EL Lamp Dimming Using PWM  
EL lamp dimming can be achieved by applying a PWM signal to the ENABLE pin. This is done by pulse skipping the out-  
put pulses. The PWM frequency should be kept below the EL frequency but above 50Hz to avoid flickering.  
Figure 4: PWM Dimming Circuit  
1
2
3
4
8
7
6
5
VDD  
REL  
EN  
VA  
VB  
+
REL  
EL Lamp  
VDD  
CDD  
-
V
GND  
DD  
PWM  
Signal  
GND  
CLKIN CLKEN  
HV853MG  
Pin Descriptions: 10-Lead DFN (K7) / 8-Lead MSOP (MG)  
K7  
MG  
Pin  
Name  
Description  
Pin #  
1
1
VDD  
Input supply voltage pin.  
An external resistor to VDD will set the EL lamp frequency. The EL frequency is inversely  
proportional to the REL resistor value. A 1.5MΩ resistor would provide a nominal lamp fre-  
quency of 280Hz  
2
2
REL  
fEL = (1.5MΩ)(280Hz) / (REL)  
When using an external clock to set the EL lamp frequency, the REL pin should be con-  
nected to ground.  
Enable input pin. Logic high will turn the device on. An external R-C circuit can be added for  
a delayed turn off.  
3
4
3
4
EN  
Logic input pin. An external logic clock applied to this pin can be used to set the EL lamp  
frequency (see Figure 3). The EL lamp frequency is the external clock frequency divided by  
128. This is useful for applications requiring the EL lamp to be synchronized to a system  
clock. Connect to ground when not in use.  
CLKIN  
5
6
-
NC  
No connect.  
Logic input pin. Logic high will cause the EL lamp frequency to be set by the CLKIN input.  
Logic low will cause the EL lamp frequency to be set by the external REL resistor.  
5
CLKEN  
7,8  
9
6
7
8
GND  
VB  
IC ground pin.  
EL lamp driver output pin. The EL lamp is connected across VA and VB terminals.  
EL lamp driver output pin. The EL lamp is connected across VA and VB terminals.  
10  
VA  
1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com  
5

与HV853相关器件

型号 品牌 描述 获取价格 数据表
HV853K7-G SUPERTEX High Voltage, Low Noise, Inductorless EL Lamp Driver

获取价格

HV853MG-G SUPERTEX High Voltage, Low Noise, Inductorless EL Lamp Driver

获取价格

HV856 SUPERTEX High Voltage Tri-EL Lamp Driver IC

获取价格

HV856K7-G SUPERTEX High Voltage Tri-EL Lamp Driver IC

获取价格

HV857 SUPERTEX High Voltage EL Lamp Driver for Low Noise Applications

获取价格

HV857 MICROCHIP The HV857 is a high voltage driver designed for driving Electroluminescent (EL) lamps of u

获取价格