HMC6042CUTTAPE

更新时间： 2024-02-08 07:36:20

品牌	Logo	应用领域
霍尼韦尔 - HONEYWELL		传感器
页数	文件大小	规格书
7页	158K
描述
2-Axis Magnetic Sensor Circuit

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

HMC6042CUTTAPE 技术参数

生命周期：	Active	Reach Compliance Code：	unknown
风险等级：	5.75	其他特性：	SENSITIVITY MAX IS 1.25MV/V/GAUSS
主体宽度：	3.6 mm	主体高度：	1.06 mm
主体长度或直径：	5 mm	最大磁场范围：	0.6 mT
最小磁场范围：	-0.6 mT	安装特点：	SURFACE MOUNT
最大工作电流：	7 mA	最高工作温度：	125 °C
最低工作温度：	-40 °C	输出范围：	0.15-2.85V
输出类型：	VOLTAGE OUTPUT	封装形状/形式：	RECTANGULAR
电阻：	6 Ω	传感器/换能器类型：	MAGNETIC FIELD SENSOR,MAGNETORESISTIVE
最大供电电压：	3.6 V	最小供电电压：	2.4 V
表面贴装：	YES	端接类型：	SOLDER
Base Number Matches：	1

HMC6042

PACKAGE OUTLINES

PACKAGE DRAWING HMC6042 (20-PIN LPCC, dimensions in millimeters)

e = 0.5 Basic

Nominal

Dimensions

Minimum

Maximum

5.00 BSC

2.50 BSC

3.60 BSC

1.50 BSC

1.06

0.89

1.23

MOUNTING CONSIDERATIONS

The following is the recommend printed circuit board (PCB) footprint for the HMC6042.

PCB Pad Definition

The HMC6042 is a fine pitch LCC package with a 0.50mm pin pitch (spacing), with the pin pads defined as 0.50mm by

0.20mm in size. PCB pads are recommended to be oversized by 0.025mm from each pad for a short dimension oversize

of 0.05mm. The interior PCB pad is recommended to be 0.05mm oversized per pin with an exterior oversize of 0.20mm

for proper package centering and to permit test probing. Lead finish is SnAgCu.

Stencil Design and Solder Paste

A 4 mil stencil and 100% paste coverage is recommended for the electrical contact pads. The HMC6042 has been tested

successfully with no-clean solder paste.

Pick and Place

Placement is machine dependant and no restrictions are recommended, and have been tested with mechanical centering.

Placement force should be equivalent 1206 SMT resistors and enough force should be used to squeeze the paste out

from the package/contact pad overlap and to keep the package pin contacts vertical.

Reflow and Rework

No special profile is required for the HMC6042 and compatible with lead eutectic and lead-free solder paste reflow

profiles. Honeywell recommends the adherence to solder paste manufacturer’s guidelines. The HMC6042 may be

reworked with soldering irons, but extreme care must be taken not to overheat the copper pads from the part’s fiberglass

www.honeywell.com

1 2 345 6 7

下载PDF

型号	品牌	描述	获取价格	数据表
HMC6042R1K	HONEYWELL	2-Axis Magnetic Sensor Circuit	获取价格
HMC6042T/R	HONEYWELL	Magnetoresistive Sensor, -.6mT Min, 0.6mT Max, 0.15-2.85V, Rectangular, Surface Mount, 5 X	获取价格
HMC6042T1K	HONEYWELL	2-Axis Magnetic Sensor Circuit	获取价格
HMC604LP3	HITTITE	GaAs PHEMT MMIC LOW NOISE AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz	获取价格
HMC604LP3_10	HITTITE	GaAs PHEMT MMIC LOW NOISE AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz	获取价格
HMC604LP3E	HITTITE	GaAs PHEMT MMIC LOW NOISE AMPLIFIER w/ BYPASS MODE, 4.8 - 6.0 GHz	获取价格