Part Numbering System
HLMP - 1 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads
A2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Options
20: Untinted or Microtinted, Non-diffused
21: Tinted, Non-diffused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
1: T-1 (3 mm)
Absolute Maximum Ratings at TA = 25°C
Parameter
Red
Yellow
Green
Units
mA
mA
mA
mW
V
Peak Forward Current
90
60
90
Average Forward Current[1]
DC Current[2]
Power Dissipation[3]
25
20
25
30
20
30
135
85
135
Reverse Voltage (IR = 100 µA)
Transient Forward Current[4] (10 µsec Pulse)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
5
5
5
500
500
500
mA
°C
110
110
110
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-20 to +100
-40 to +100
°C
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at 1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die
and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute
Maximum Ratings.
2