HLMP-R100, HLMP-0301, HLMP-0401, HLMP-0504
2.5 mm x 7.6 mm Rectangular LED Lamps
Data Sheet
Description
Features
The HLMP-R100, -0301, -0401, -0504 are solid state • Rectangular light emitting surface
lamps encapsulated in a radial lead rectangular epoxy
• Flat high sterance emitting surface
package. They utilize
a tinted, diffused epoxy to
• Stackable on 2.54 mm (0.100 inch) centers
• Ideal as flush mounted panel indicators
• Ideal for backlighting legends
• Long life: solid state reliability
• Choice of 4 bright colors
– DH AS AlGaAs Red
provide high on-off contrast and a flat high intensity
emitting surface. Borderless package design allows
creation of uninterrupted light emitting areas.
The HLMP-R100 uses a double heterojunction (DH)
absorbing substrate (AS) aluminum gallium arsenide
(AlGaAs) red LED chip in a light red epoxy package. This
combination produces outstanding light output over a
wide range of drive currents.
– High Efficiency Red
The HLMP-0301 has a high efficiency red GaAsP on
GaP LED chip in a light red epoxy package.
– Yellow
– High Performance Green
The HLMP-0401 provides a yellow GaAsP on GaP LED chip
in a yellow epoxy package.
• IC compatible/low current requirements
The HLMP-0504 provides a green GaP LED chip in a green
epoxy package.
Package Dimensions
7.62 (0.300)
7.11 (0.280)
7.62 (0.300)
6.99 (0.275)
0.46 (0.018)
SQ. NOMINAL
2.54 (0.100)
NOMINAL
CATHODE LEAD
29.21 (1.15) MIN.
BOTTOM VIEW
8.00 (0.315)
7.37 (0.290)
1.27 (0.50)
NOMINAL
NOTES:
1. ALL DIMENSIONS ARE IN
MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND
ABOUT 1 mm (0.040") DOWN THE LEADS.
2.54 (0.100)
2.16 (0.085)
2.54 (0.100)
2.29 (0.090)
3. THERE IS A MXIMUM 1 TAPER FROM
BASE TO THE TOP OF LAMP.
SIDE VIEW