HIP9021
Portable Battery Drive/Torque Controller for
N-Channel MOSFETs in Motor Control Systems
PRELIMINARY
August 1996
Features
Description
• MOSFET Driver and DC Motor Controller
• Torque Control and Overload Protection
The HIP9021IB is a dedicated Power MOSFET driver which
drives a DC motor. As a system, motor speed is controlled
while controlling torque. The primary application is drive con-
• Battery Power Supply . . . . . . . . . . . . . . . . +5V to +15V
• BiMOS IC with Low Operating Current
trol for portable drills while providing overload protection.
The main function of the HIP9021IB is to produce a pulse
width modulated square wave signal which drives the gate of
an N-Channel Power MOSFET. The duty-cycle is deter-
mined by the setting of an external potentiometer at the
TRIGGER (speed control) input. As the TRIGGER voltage
level is decreased the duty-cycle of the square wave and the
speed of the motor is increased.
- Maximum Supply Current . . . . . . . . . . . . . . . . .1.5mA
- Maximum Input Leakage Currents . . . . . . . . . . 1.5µA
• 500µA Maximum Supply Current
• 1µA Maximum Input Leakage Currents
• Typical Oscillator Frequency . . . . . . . . . . . . . . . . .5kHz
• Power-On-Reset Control
The torque of the motor is limited by the voltage level sensed
at the drain of the external Power MOSFET. When the cur-
rent reaches an adjustable limit set at the TORQUE input,
the drive of the Power MOSFET is disabled.
• 10mA Drive Capability for Gate Output
o
o
• Operating Temperature . . . . . . . -40 C to +85 C Range
Applications
The system control components include 2 adjustable poten-
tiometer controls and 2 capacitors for the operating fre-
quency and torque delay control. A fixed or battery supply
voltage in the range of 5V to 15V may be used.
• Portable Battery Operated Electric Drills
• Controller for Small DC Electric Motors
• Torque/Drive Controller for Inductive Loads
• Intelligent MOSFET Drive
The HIP9021IB is provided in a small outline plastic package
for a compact surface mount to a ceramic substrate. The
surface mount assembly can be fit directly into the trigger of
a portable electric drill.
Ordering Information
TEMP.
PKG.
NO.
o
PART NUMBER RANGE ( C)
PACKAGE
HIP9021IB
-40 to +85 8 Ld SOIC
M8.15
Pinout
HIP9021IB
(SOIC)
TOP VIEW
DRAIN
1
2
3
4
8
7
6
5
V
DD
TRIGGER
GND
GATE
DELAY
TORQUE
OSC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
File Number 4055
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1