HI-8425, HI-8426
8-Channel, Ground /Open, or Supply / Open Sensor
4-channel 200 mA Ground / Open Driver
August 2013
GENERAL DESCRIPTION
· Airbus ABD0100H compliant
The HI-8425 is a combined 8-channel discrete-to-digital
sensor and quad low side driver fabricated with Silicon-on-
Insulator (SOI) technology for robust latch-up free
operation. Sense detection can either be GND/Open or
Supply/Open as configured by the SNSE_SEL pin.
Supply/Open sensing is also referred to as 28V/Open
sensing. The sensing circuit window comparator thresholds
can be fixed at the internal programmed values or can be
set externally at the HI_SET and LO_SET pins, as selected
by the THS_SEL pin. The digital SENSE outputs can be tri-
stated by taking the OE pin high.
· 4 Low-Side 200 mA drivers
· 4.5 Ohm On Resistance
· Over-Current Fault Detection Signaled by Logic Output
· Max Power Dissipation Automatically Limited by
Fault Protection
· Diode Clamps for Discharging Inductive Loads
APPLICATIONS
· Avionics Discrete to Digital Sensing
All sense inputs are internally lightning protected to
DO160G, Section 22, Cat AZ, BZ and ZZ without external
components.
· Relay Driver
· Lamp driver
· Discrete Signaling
The HI-8425 also offers four low side switches each
capable of sinking 200 mAof current. Each switch transistor
is controlled by its own digital input pin and is fully fault
protected. Over-current conditions, such as a short circuit,
are detected and inhibited while signaling the fault
condition at the corresponding logic output. These four
FAULT outputs are also available in a combined OR output.
The outputs are fully protected from transients when driving
relays.
PIN CONFIGURATIONS
30 -
VWET - 1
SENSE0 - 2
SENSE1 - 3
SENSE2 - 4
SENSE3 - 5
SENSE4 - 6
SENSE5 - 7
SENSE6 - 8
SENSE7 - 9
OE - 10
29 - FAULT_0
28 - DRV_0
27 - DRV_1
26 - FAULT_1
25 - GND
HI-8425PCI
HI-8425PCT
The HI-8426 puts all of the features of the HI-8425 except
the individual Fault Detection Outputs, Tri-state pin
selection and fixed internal thresholds into a 32-pin Chip
Scale Package (QFN) which measures only 5mm x 5mm.
24 - FAULT_2
23 - DRV_2
22 - DRV_3
21 - FAULT_3
Interface to the digital subsystem is simple CMOS logic
inputs and outputs. The logic pins are compatible with 5V or
3.3V logic allowing direct connection to a wide range of
microcontrollers or FPGAs.
40 Pin Plastic 6mm x 6mm
Chip-scale package (QFN)
24 - DSEL_3
23 - DRV0
22 - DRV1
SENSE0 - 1
SENSE1 - 2
SENSE2 - 3
SENSE3 - 4
SENSE4 - 5
SENSE5 - 6
SENSE6 - 7
SENSE7 - 8
FEATURES
HI-8426PCI
HI-8426PCT
21 - GND
20 - DRV_2
19 - DRV_3
18 - FAULT_OR
17 - GND
· Robust CMOS Silicon-on-Insulator (SOI) technology
· 8-channel Selectable Sense Operation, GND/Open
or Supply/Open
· Selectable Thresholds and Hysteresis
· Sense Detection Range 3V to 22V
· Logic Operation from 3.0V to 5.5V
· Lightning Protected Sense Inputs
32 Pin Plastic 5mm x 5mm
Chip-scale package (QFN)
(See page 15 for leaded QFP package options)
HOLT INTEGRATED CIRCUITS
www.holtic.com
(DS8425 Rev. C)
08/13