HFBR-X5X5XZ
FiberOpticTransmittersandReceiversforSERCOS,
PROFIBUSandINTERBUS-SApplications
DataSheet
HFBR-1505AZ/2505AZ (SMA Tx/Rx for SERCOS)
®
HFBR-1515BZ/2515BZ (ST Tx/Rx for PROFIBUS)
HFBR-1505CZ/2505CZ (SMA Tx/Rx for INTERBUS-S)
Description
Features
• Meets industrial SERCOS, PROFIBUS, and INTERBUS-S standard
SERCOS
®
• SMA and ST ports
SERCOS, an acronym for SErial Realtime COmmunications System, is a
standard digital interface for communication in industrial CNC applications. • 650 nm wavelength technology
SERCOS is a European (EN 61491) and international standard (IEC 61491).
• Specified for use with 1 mm plastic optical fiber and 200 µm
The optical interface allows data rates of 2, 4, 8, and 16 MBd and data
transfer between numerical controls and drives via fiber-optic rings, with
voltage isolation and noise immunity. The HFBR-1505AZ and HFBR-2505AZ
products comply with SERCOS specifications for optical characteristics and
connector style, and have guaranteed performance up to 10 MBd. (Typically
the 16 MBd required by SERCOS is possible as well but please contact Avago
regarding the plan for the 16 MBd device.)
hard clad silica
• Auto-insertable and wave solderable
• DC – 10 MBd data rate
• RoHS-compliant
Applications
• Industrial control data links
• Factory automation data links
PROFIBUS
PROFIBUS, an acronym of PROcess FIeld BUS, is an open fieldbus standard
defined for data rates ranging from 9.6 kBd to 12 MBd in selectable steps • Voltage isolation applications
for wire and optical fiber. PROFIBUS is a German national DIN 19245 standard
and a European CENELEC standard EN 50170. The ST connector is the
• PLCs
®
• Motor drives
recommended optical port of the PROFIBUS optical fiber version but other
connectors are allowed as well. The HFBR-1515BZ and HFBR-2515BZ comply
fully to the technical guideline using Plastic Optical Fiber up to 6 MBd, and
have a guaranteed performance at data rates up to 10 MBd. (Typically the
12 MBd is possible as well, but please contact Avago regarding the plan for
the 12 MBd device.)
• Sensor, meter and actuator interfaces
INTERBUS-S
INTERBUS-S, a special open Sensor/Actuator Bus, is finding a broad
acceptance in the factory automation industry. The HFBR-1505CZ and HFBR-
2505CZ were specially designed for this application and can be used with 1
mm POF and 200 µm HCS fiber at the specified data rates of 500 kBd and
2 MBd. The optical transmission guideline is a supplement of the German
National DIN E 19258 standard draft. On the European level, prEN 50254 is
the draft of the INTERBUS-S fieldbus.
®
ST is a registered trademark of AT&T.
®
HCS is a registered trademark of SpecTran Corporation.