HS-1100RH
Data Sheet
August 1999
File Number 4100.2
Radiation Hardened, Ultra High Speed
Current Feedback Amplifier
Features
• Electrically Screened to SMD # 5962-94676
The HS-1100RH is a radiation hardened high speed,
wideband, fast settling current feedback amplifier. Built with
Intersil’s proprietary, complementary bipolar UHF-1 (DI
bonded wafer) process, it is the fastest monolithic amplifier
available from any semiconductor manufacturer. These
devices are QML approved and are processed and screened
in full compliance with MIL-PRF-38535.
• QML Qualified per MIL-PRF-38535 Requirements
• Low Distortion (HD3, 30MHz). . . . . . . . . . . . -84dBc (Typ)
• Wide -3dB Bandwidth. . . . . . . . . . . . . . . . . 850MHz (Typ)
• Very High Slew Rate . . . . . . . . . . . . . . . . 2300V/µs (Typ)
• Fast Settling (0.1%) . . . . . . . . . . . . . . . . . . . . . 11ns (Typ)
• Excellent Gain Flatness (to 50MHz). . . . . . . 0.05dB (Typ)
• High Output Current . . . . . . . . . . . . . . . . . . . 65mA (Typ)
• Fast Overdrive Recovery . . . . . . . . . . . . . . . . <10ns (Typ)
• Total Gamma Dose. . . . . . . . . . . . . . . . . . . . 300kRAD(Si)
• Latch Up. . . . . . . . . . . . . . . . . . . . . None (DI Technology)
The HS-1100RH’s wide bandwidth, fast settling characteristic,
and low output impedance make this amplifier ideal for driving
fast A/D converters.
Component and composite video systems will also benefit
from this amplifier’s performance, as indicated by the
excellent gain flatness, and 0.03%/0.05 Deg. Differential
Gain/Phase specifications (R = 75Ω).
L
Applications
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
• Video Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• RF/IF Signal Processing
• Flash A/D Driver
Detailed Electrical Specifications for these devices are
contained in SMD 5962-94676. A “hot-link” is provided
on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
• Imaging Systems
Ordering Information
INTERNAL
MKT. NUMBER
TEMP. RANGE
Pinout
o
ORDERING NUMBER
5962F9467602VPA
5962F9467602VPC
HFA1100IJ (Sample)
HFA11XXEVAL
( C)
HS-1100RH
GDIP1-T8 (CERDIP)
OR CDIP2-T8 (SBDIP)
TOP VIEW
HS7-1100RH-Q
HS7B-1100RH-Q
HFA1100IJ
-55 to 125
-55 to 125
-40 to 85
NC
-IN
+IN
V-
1
2
3
4
8
7
6
5
NC
V+
Evaluation Board
-
+
OUT
NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1