HC5503
®
Data Sheet
J une 2004
FN4344.5
Low Cos t 24V SLIC For PABX/Key
Sys tems
Features
• Wide Operating Battery Range (-21V to -44V)
• Single Additional +5V Supply
The Intersil HC5503 low cost SLIC is optimized for use in
small Analog or mixed Analog and Digital Key Telephone
Systems (KTS) or PBX products. The low component count
solution and surface mount package options, enable a small
desktop Key System/PBX product to be achieved. The
internal power dissipation of the end product is minimized by
the low power consumption and minimal power supply
voltage requirements of the HC5503.
• 25mA Short Loop Current Limit
• Ring Relay Driver
• Switch Hook and Ring Trip Detect
• Low On-Hook Power Consumption
• On-Hook Transmission
The HC5503 integrated solution provides higher quality,
higher reliability and better performance solution than a
transformer, thick film hybrid or discrete analog subscriber
interface design.
• ITU-T Longitudinal Balance Performance
• Loop Power Denial Function
• Thermal Protection
The HC5503 is designed in a Dielectrically isolated bipolar
technology and is inherently latch proof and does not require
hot plug or power supply sequencing precautions.
• Supports Tip, Ring or Balanced Ringing Schemes
• Low Profile Surface Mount Packaging
• Pin Compatible with Industry Standard HC5504B SLIC
• Pb-free Available
Ordering Information
TEMP.
PKG.
PART NUMBER RANGE (°C)
PACKAGE
24 Ld SOIC
DWG. #
Applications
HC5503CB
0 to 75
0 to 75
0 to 75
M24.3
• Analog Subscriber Line Interfaces in Analog Key Systems
and Digital ISDN PABX Systems
HC5503CBZ (Note)
24 Ld SOIC (Pb-free) M24.3
24 Ld SOIC (Pb-free) M24.3
• Related Literature
HC5503CBZ96
(Note)
- AN571, Using Ring Sync with HC-5502A and HC-5504
SLICs
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Harris Corporation 1997-1998, Copyright Intersil Americas Inc. 1999, 2003, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.