GP20A THRU GP20M
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT: 2.0A
DO-15\DO-204AC
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
unit
s
SYMBOL
GP
20A
GP
20B
GP
20D 20G
GP
GP
20J
GP
20K
GP
20M
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Vrrm
Vrms
Vdc
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800 1000
560 700
800 1000
V
V
V
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
2.0A
If(av)
Ifsm
Vf
2.0
A
A
65.0
1.2
1.1
V
Maximum full load reverse current full cycle
Average at 55°C
Ir(av)
Ir
100.0
5.0
µA
µA
µS
PF
Maximum DC Reverse Current
at rated DC blocking voltage
Typical Reverse Recovery Time
Ta =25°C
(Note 1)
(Note 2)
Trr
2.5
Typical Junction Capacitance
Cj
40.0
25.0
°C
/W
°C
Typical Thermal Resistance
(Note 3)
R(ja)
Storage and Operating Junction Temperature
Note:
Tstg, Tj
-65 to +175
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A4
www.gulfsemi.com