Front Panel Description (7.5V < Vout < 20V)
4
6
1
3
5
7
8
2
1. AC ON/OFF Switch (circuit breaker for Vout < 20V; rocker switch for Vout > 20V models)
2. Air Intake allows zero-stacking for maximum system flexibility and power density.
3. Continuous encoder controls Output Voltage, Address, OVP and UVL settings.
4. Voltage Display shows Output Voltage and directly displays OVP, UVL and Address settings.
5. Continuous encoder controls Output Current, sets Baud rate and Advanced Parallel mode.
6. Current Display shows Output Current and displays Baud rate. Displays total current in Parallel Master/Slave Mode.
7. Function/Status LEDs:
• Alarm
• Foldback Mode
• Fine Control
• Remote Mode
• Preview Settings
• Output On
8. Push•butCtoonasrsaelloawndflFexinibeleadujsuesrtmcoennfitgouf rOautiotpnut Voltage/Output Current and Advanced Parallel Master or Slave select.
• Preview Settings and set Voltage/Current with Output OFF, Front Panel Lock/Unlock.
• Parallel Master/Slave (Basic and Advanced).
• Set Output OVP and UVL Limits.
• Set Output Current Foldback Protection.
• Go to Local Mode and select unit Address and Baud rate.
• Output ON/OFF and Safe-Start/Auto Re-Start mode.
Rear Panel Description (7.5V < Vout < 20V)
2
4
3
5
9
1
7
8
6
1. Remote/Local Output Voltage Sense Connections.
2. DIP Switches select 0-5V or 0-10V Programming and other functions.
3. DB25 (Female) connector allows Analog Program and Monitor (non-isolated) and other functions.
4. RS-485 OUT to other Genesys™ Power Supplies.
5. RS-232/RS-485 IN Remote Serial Programming.
6. Output Connectors: Rugged 2 hole busbars (shown) for models where Vout < 20V,
single hole busbars for 20V < Vout < 300V Output, and threaded-stud terminals for models where Vout > 300V.
7. Exit air assures reliable operation when zero-stacked.
8. Input Terminals L1, L2, L3, and Ground (threaded studs).
9. Optional location for LAN (LXI 1.5), IEEE (488.2 & SCPI compliant), USB (2.0) or Isolated Analog Interface.
2