Surface Mount Relay
G6H–2F
Low Profile, Miniature, Surface Mount
Relay
Ultra low profile only 5.2mm.
Can be soldered by VPS or IRS methods.
Impulse withstand voltage meets FCC and CCITT
rules.
Low power consumption, 140mW.
Available on tape for automatic insertion.
Ordering Information
Classification
Single-side stable
DPDT
Fully sealed
G6H-2F
Note: 1. When ordering, add the rated coil voltage to the model number
.
Example: G6H-2F 12 VDC
Rated coil voltage
2. When ordering tape packing, add ‘TR’ to the model number
Example: G6H-2F TR 12 VDC
.
Tape packing
3. ‘TR’is not part of the relay model number, it is not marked on the relay case.
Model Number Legend:
G6H–2F
1. Taped
V
ersion
aped right
aped left
2. Rated Coil Voltage
-
TR:
TL:
T
T
5, 12, 24 VDC
1
2
Specifications
Coil Ratings
Single-side Stable Types
Rated voltage
Rated current
Coil resistance
5 VDC
12 VDC
24 VDC
8.3 mA
28.1 mA
11.7 mA
178
Ω
1,028
0.43
0.37
Ω
2,880
1.2
Ω
Coil inductance
(H) (ref. value)
Armature OFF
Armature ON
0.065
0.058
1.0
Must operate voltage
Must release voltage
Max. voltage
75% max. of rated voltage
10% min. of rated voltage
200% of rated voltage at 23
_
C, 150% at 70_C
170% of rated voltage at
23_C, 130% at 70_C
Power consumption
Approx. 140 mW
Approx. 200 mW
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23
2. Operating characteristics are measured at a coil temperature of 23_C.
Contact Ratings
_
C with a tolerance of ±10%.
Load
Resistive load (cos = 1)
0.5 A at 125 VAC; 1 A at 30 VDC
Ag (Au-clad)
Rated load
Contact material
Rated carry current
Max. switching voltage
Max. switching current
Max. switching capacity
Min. permissible load
1 A
125 VAC, 110 VDC
1 A
62.5 VA, 33 W
10 µA at 10 mVDC