Mult ipurpose Enclosures
Specifications :
Polycarbonate material :
Moulded in
: Light grey.
Operating temperature
Clear lid is available on request.
: -40°C to 120°C.
High impact ABS material :
Moulded in
: Dark grey.
Suggested operating temperature : -20°C to 80°C.
The lid and base incorporate a tongue and groove sealing system with a neoprene gasket.
Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture and dust.
Designed to IP 65 of IEC 529 and nema 4 (dust and hoseproof).
Available with clear or light grey LIDS.
Internal guide slots for mounting PCB assemblies vertically.
Bosses on internal base allow fixing of PCB's horizontally or connection of terminals, etc into threaded brass inserts.
Lid fixing screw are M-4 stainless steel (nonmagnetic) into threaded brass inserts.
Specifications Table
External Dimensions
Description
Colour
Material
Part Number
(mm)
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
Box, ABS, IP65, Grey
64 × 58 × 35
115 × 65 × 40
115 × 65 × 55
115 × 90 × 55
171 × 121 × 55
222 × 146 × 55
115 × 90 × 80
171 × 121 × 80
G302
G304
G308
G311
G313
G317
G331
G340
Dark Grey
ABS
www.element14.com
www.farnell.com
www.newark.com
Page <1>
13/05/11 V1.1