Document No.: FT_000288
FT232H SINGLE CHANNEL HI-SPEED USB TO MULTIPURPOSE UART/FIFO IC
Datasheet Version 1.81
Clearance No.: FTDI #199
Appendix B – Revision History
Document Title:
Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC FT232H
Document Reference No.:
Clearance No.:
FT_000288
FTDI #199
Product Page:
http://www.ftdichip.com/Products/ICs/FT232H.htm
Send Feedback
Document Feedback:
Revision History
Version draft 1.0
Version 1.0
First draft available
First release
13th January 2011
24th February 2011
19th April 2011
Version 1.1
Changes made to ACBUS7 details.
Updated the reset line of the schematics.
Added USB Compliance logo and TID
Version 1.2
Version 1.3
Corrected TID number
April 2011
Changed the value of recommended capacitor on the Reset# pin
Changed signal label of WR to WR#
May 2011
Version 1.4
Version 1.5
Missing #(active low) on WR signal pgae 8 and page 40
Enhanced recommended schematics.
September 2011
Added Pin 31 ACBUS7 Description (Table 9.1)
Added Package Dimension Tolerance in Section 8.2
Added a list of unsupported baud rates to section 4.1
data transfer rate
25th November 2011
25th January 2012
Version 1.6
Updated section 1.1, Linux Version
Updated Timing information, Figure 4.21 and Table 4.8
Updated section 7.2 default descriptors
Added a note on Section 4.2, EEPROM interface
93LC46B is not compatible with the FT232H
Modified the IC mark, Figure 8.1 and Figure 8.2
Update contact information
Version 1.7
Version 1.8
Version 1.81
21st June 2012
13st Dec 2012
4th Jan 2013
Added detail to QFN drawing regarding the center pad
Corrected figure 6.4
Added clarification for which signals are 5V tolerant
Clarified ACBUS default functions on P8
Copyright © 2014 Future Technology Devices International Limited
65